Sony MZ-R909 User Manual download pdf (Page 35)

35

Adding track marks

automatically at

specified intervals

(Auto Time Stamp)

Use this feature to add track marks

automatically at specified intervals when

recording through the analog input

connector or a microphone.

1 While the recorder is recording or in

recording pause, press the jog dial.

2 Turn the jog dial until “TIME

MARK” flashes in the display, and

then press the dial.

3 Turn the jog dial until the desired

time interval flashes in the display.

Select one of the following intervals.

4 Press the jog dial.

To cancel Auto Time Stamp

Select “OFF” in step 3, and then press the

jog dial, or stop recording.

Using Auto Time Stamp to add

track marks while recording

After you set the time interval in step 4,

the recorder will begin adding a track

mark whenever the time interval has

elapsed. For example, if an Auto Time

Stamp interval of 5 minutes is set, and 8

minutes of recording has already been

done, then a track mark will be added at a

point equivalent to 13 minutes (8 + 5)

after the start of recording, and every 5

minutes thereafter.

If, however, the Auto Time Stamp interval

is longer than the elapsed recording time,

then a track mark will be added when the

Auto Time Stamp interval has elapsed.

For example, if the Auto Time Stamp

interval is set at 5 minutes, but only 3

minutes of recording has been done, then

a track mark will be added at the 5-minute

point after the start of the recording, and

every 5 minutes thereafter.

z

“T” appears before the time display on the

recorder for track marks added by Auto Time

Stamp, and “T” appears after the time display

on the remote control.

Notes

• Automatic track marking by Auto Time Stamp

starts when you add a normal track mark to

the disc (i.e., by pressing T MARK or X,

etc.).

• The setting will be lost when the recording

stopped.

Display Time

OFF —

5 min. ON Approx. 5 min.

10 min. ON Approx. 10 min.

15 min. ON Approx. 15 min.

Jog dial

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 91 92

Comments to this Manuals

No comments