Sony MZ-NHF800 User Manual Page 91

  • Download
  • Add to my manuals
  • Print
  • Page
    / 128
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 90
91
The disc size
displayed on the
computer is not the
same as the disc size
printed on the disc.
The difference is due to the use of the binary system to indicate the disc
size on the computer and the decimal system to express the disc size on
the disc and other recording media. For details on the disc size, see
page 79.
You cannot operate
the recorder (“PC –
–MD” appears).
You cannot operate the recorder while the recorder is connected to the
computer.
The lid does not
open.
It happens if you disconnect the dedicated USB cable in the middle of a
data transfer, recording, or editing operation on the computer, but while
the rechargeable battery is missing from the recorder or is drained.
, Reconnect the dedicated USB cable or insert a fully charged
rechargeable battery into the recorder, and then press x.
Symptom Cause/Remedy
Others
Symptom Cause/Remedy
Some menu items
cannot be displayed.
“Menu Mode” is set to “Simple”.
,
Set the “Menu Mode” to “Advanced” to display all the menu items.
The recorder does
not work or works
poorly.
The rechargeable battery is not charged.
, Charge the rechargeable battery.
The volume is low.
, Turn up the volume.
No disc is inserted.
, Insert a recorded disc.
The HOLD function is turned on (“HOLD” appears in the display
when you press an operation button on the recorder).
, On the recorder, disable HOLD by sliding the HOLD switch to the
opposite direction of the arrow
(pages 12, 16).
The lid is not firmly closed.
, Close the lid until it clicks. Then slide OPEN to open the lid.
Moisture has condensed inside the recorder.
, Take the disc out and leave the recorder in a warm place for several
hours until the moisture evaporates.
The AC power adaptor is not firmly connected.
, Connect the AC power adaptor firmly to the DC IN 3V jack on the
recorder.
The rechargeable battery or dry battery is weak (“LOW BATTERY
flashes or nothing appears).
, Charge the rechargeable battery, replace the dry battery with a new
one, or use the supplied AC power adaptor.
The disc is damaged or does not contain proper recording or editing data.
, Reinsert the disc. Rerecord the disc. If the error message still
appears, replace it with another disc.
There is a built-in malfunction in the system.
While operating, the recorder received a mechanical shock, too much
static, abnormal power voltage caused by lightning, etc.
, Restart the operation as follows.
1 Disconnect all the power sources and the dedicated USB cable.
2 Leave the recorder for about 30 seconds.
3 Connect the power source.
Page view 90
1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 127 128

Comments to this Manuals

No comments