Sony MZ-G755 Operations Instructions download pdf (Page 65)

Troubleshooting

Should any problem persist after you have made these checks,

consult your nearest Sony dealer.

MD Recorder

The recorder does not work or works poorly.

• Audio sources may not be firmly connected.

— Disconnect the audio sources once and connect them again

(pages 13, 24).

• The HOLD function is turned on (“HOLD” appears in the display

when you press an operation button on the recorder).

— Disable HOLD by moving the HOLD switch in the opposite

direction of the arrow (page 11).

• Moisture has condensed inside the recorder.

— Take the MD out and leave the recorder in a warm place with the

lid open for several hours until the moisture evaporates.

• The rechargeable battery or dry battery is weak (r or “LOW

BATT” flashes on the recorder).

— Charge the rechargeable battery or replace the dry battery

(page 57).

• The rechargeable battery or dry battery have been inserted

incorrectly.

— Insert the battery correctly (page 10).

• You pressed a button while the disc indication was rotating quickly.

— Wait until the indication rotates slowly.

• The analog recording was made using a connecting cord with an

attenuator.

— Use a connecting cord without an attenuator (page 24).

• While operating, the recorder received a mechanical shock, too

much static, abnormal power voltage caused by lightning, etc.

— Restart the operation as follows.

1 Disconnect all the power sources.

2 Leave the recorder for about 30 seconds.

3 Connect the power source.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 75 76

No comments

Sony MZ-G755 Operations Instructions Page 65