Sony VGP-MR200 Operations Instructions download pdf (Page 32)

Using the software keyboard

The software keyboard appears on the screen whenever SSID or Key Phrase is selected on the

“Wireless LAN Configurations” screen.

Use this display to input a character string as follows.

1 Select the input mode.

Use the V/v/B/b buttons to select “Number”, “abc”, “ABC”, or “Symbol”, and

press the SELECT button.

The key input buttons for the selected mode are shown on the screen.

2 Use the V/v/B/b buttons to select the desired character, and press the

SELECT button.

The selected character appears at the character cursor position in the display field.

3 Repeat steps 1 and 2 to enter the full string for the SSID or Key Phrase

field.

4 When the input is complete, use the V/v/B/b buttons to select “Enter”,

and press the SELECT button.

The entered character string is set at the SSID or Key Phrase, and the Software

Keyboard display closes.

To delete the character positioned immediately before the character

Use the V/v/B/b buttons to select “BS”, and press the SELECT button.

To start the input over

Use the V/v/B/b buttons to select “Clear”, and press the SELECT button.

The entire string entered so far is cleared.

To enter a space

Use the V/v/B/b buttons to select “Space”, and press the SELECT button.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 68 69

No comments

Sony VGP-MR200 Operations Instructions Page 32