Sony MFM-HT95 User Manual download pdf (Page 35)

100

101

Trouble symptoms and remedies

If a problem occurs as a result of a connected computer or other equipment, refer to the connected computer/equipment’s instruction manual.

For PC 1/PC 2

Symptom Check these items

No picture.

If the 1 (power) indicator is not lit,

or if the 1 (power) indicator will not

light up when the 1 (power) switch

is pressed,

• Check that the mains lead is properly connected.

If “Cable Disconnected” appears on

the screen,

• Check that the video signal cable is properly connected and all plugs are firmly seated in

their sockets (page 9).

• Check that the video input connector’s pins are not bent or pushed in.

• Check that the input select setting is correct (page 12).

• A non-supplied video signal cable is connected. If you connect a non-supplied video

signal cable, “Cable Disconnected” may appear on the screen. This is not a malfunction.

If “No Input Signal” appears on the

screen, or the 1 (power) indicator is

orange,

• Check that the video signal cable is properly connected and all plugs are firmly seated in

their sockets (page 9).

• Check that the video input connector’s pins are not bent or pushed in.

• Check that the input select setting is correct (page 12).

xProblem caused by a computer or other equipment connected, and not

caused by the display

• The computer is in the power saving mode. Try pressing any key on the keyboard or

moving the mouse.

• Check that your graphics board is installed properly.

• Check that the computer’s power is on.

• Restart the computer.

If “Out of Range” appears on the

screen (page 34),

xProblem caused by a computer or other equipment connected, and not

caused by the display

• Check that the video frequency range is within that specified for the display. If you

replaced an old display with this display, reconnect the old display and adjust the

computer’s graphics board within the following ranges:

MFM-HT75W

Horizontal frequency: 28–69 kHz (Analog RGB), 28–48 kHz (Digital RGB)

Vertical frequency: 48–85 Hz (Analog RGB), 60 Hz (Digital RGB)

Resolution: 1280 × 768 or less

MFM-HT95

Horizontal frequency: 28–86 kHz (Analog RGB), 28–64 kHz (Digital RGB)

Vertical frequency: 48–85 Hz (Analog RGB, resolution<1280 × 1024), 48–75 Hz (Analog

RGB, resolution=1280 × 1024), 60 Hz (Digital RGB)

Resolution:1280 × 1024 or less

For the MFM-HT75W only

SXGA picture is displayed with Safe Display Mode but it may be fuzzy. Set the resolution

to 1280 × 768 on your computer.

If using Windows, • If you replaced an old display with this display, reconnect the old display and do the

following. Select “SONY” from the “Manufacturers” list and select “MFM-HT75W or

MFM-HT95” from the “Models” list on the Windows device selection screen. If “MFM-

HT75W or MFM-HT95” does not appear in the “Models” list, try “Plug & Play.”

If using a Macintosh system, • When connecting a Macintosh computer, use an adapter (not supplied) if necessary.

Connect the adapter to the computer before connecting the video signal cable.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 865 866

Comments to this Manuals

No comments

Sony MFM-HT95 User Manual Page 35

Comments to this Manuals

Related products and manuals for LCD TVs Sony MFM-HT95