Sony KDL-40ZX1 User Manual download pdf (Page 51)

Additional Information

Channels

The desired channel cannot be

selected

• Switch between digital and analogue mode and select the desired digital/

analogue channel.

Some channels are blank • Scrambled/Subscription only channel. Subscribe to the pay TV service.

• Channel is used only for data (no picture or sound).

• Contact the broadcaster for transmission details.

Digital channels are not

displayed

• Contact a local installer to find out if digital transmissions are provided

in your area.

• Upgrade to a higher gain antenna.

Wireless communication

Delay pictures • Wireless communication takes time to establish after turning the power

on. About 20 seconds are needed to display pictures. Selecting “Quick

Start” may shorten the waiting time (page 33).

“Wireless communication in

progress.” does not disappear,

or “Wireless communication

failed.” is displayed

• When the wireless communication is disturbed, it takes about 15 seconds

to display pictures again. “Wireless communication in progress.” is

displayed until pictures come back.

•

Check the installation situation of the monitor and media receiver (page 10).

• Check whether wireless equipment using the same radio frequency as

this unit is working near by, or something disturbing wireless

communication of this unit is close to the unit. In such cases, keep such

equipment away from the unit or turn off the power of that equipment.

Noisy or interrupted picture or

sound

•

Check the installation situation of the monitor and media receiver (page 10).

• Pictures may be distorted if somebody walks across between the monitor

and media receiver.

• Check whether wireless equipment using the same radio frequency as

this unit is working near by, or something disturbing wireless

communication of this unit is close to the unit. In such cases, keep such

equipment away from the unit or turn off the power of that equipment.

General

Distorted picture and/or sound • Keep the unit away from electrical noise sources such as cars,

motorcycles, hair-dryers or optical equipment.

• When installing optional equipment, leave some space between the

optional equipment and the unit.

• Check the antenna/cable connection.

• Keep the antenna/cable TV cable away from other connecting cables.

The unit turns off

automatically (the unit enters

standby mode)

• Check if the “Sleep Timer” is activated, or confirm the “Duration”

setting of “On Timer Settings” (page 33).

The unit turns on automatically • Check if the “On Timer” is activated (page 33).

Some input sources cannot be

selected

• Select “Video Labels” and cancel “Skip” of the input source (page 35).

The remote does not function • Replace the batteries.

•Register the remote to the unit using the //// buttons on the

front of the media receiver (page 46).

A channel cannot be added to

the Favourite list

• Up to 999 channels can be stored in the Favourite list.

HDMI equipment does not

appear on “HDMI Device List”

• Check that your equipment is “Control for HDMI” compatible

equipment.

Not all channels are tuned • Check support web site for cable provide information:

http://www.sony-asia.com/bravia/flash.html

You cannot select “Off” in

“Control for HDMI”

•

If any “Control for HDMI” compatible audio equipment is connected to the unit,

you cannot select “Off” in this menu. If you want to change the audio output to

the unit speakers, select “TV Speaker” in the “Speaker” menu (page 35).

The “Store Display Mode: On”

message appears on the screen

• Select “Factory Settings” in the “Media Receiver Set-up” menu

(page 36).

Condition Explana tion/Solution

(Continu ed)

1 2 ... 46 47 48 49 50 51 52 53 54 55 56

Comments to this Manuals

No comments

Sony KDL-40ZX1 User Manual Page 51

Comments to this Manuals

Related products and manuals for LCD TVs Sony KDL-40ZX1