Sony KDL-40V4000 User Manual download pdf (Page 9)

Safety

Information

Installation/Set-up

Install and use the TV set in accordance with the instructions below

in order to avoid any risk of fire, electrical shock or damage and/or

injuries.

Installation

s The TV set should be installed near an easily accessible AC

power outlet.

s Place the TV set on a stable, level surface to avoid it from

falling down and cause personal injury or damage to the TV.

s Only qualified service personnel should carry out wall

installations.

s For safety reasons, it is strongly recommended that you use

Sony accessories, including:

– Wall-mount bracket SU-WL500

– Wall-mount bracket SU-WL50B

– TV stand SU-FL300M

s Be sure to use the screws supplied with the Wall-mount bracket

when attaching the mounting hooks to the TV set. The supplied

screws are designed so that they are 8 mm to 12 mm in length

when measured from the attaching surface of the mounting

hook.

The diameter and length of the screws differ depending on the

Wall-mount bracket model.

Use of screws other than those supplied may result in internal

damage to the TV set or cause it to fall, etc.

Transporting

s Before transporting the TV set,

disconnect all cables.

s Two or more people are

needed to transport a large TV

set.

s When transporting the TV set

by hand, hold it as shown on

the right. Do not put stress on

the LCD panel.

s When lifting or moving the TV

set, hold it firmly from the

bottom.

s When transporting the TV set,

do not subject it to jolts or

excessive vibration.

s When transporting the TV set

for repairs or when moving,

pack it using the original

carton and packing material.

Ventilation

s Never cover the ventilation holes or insert anything in the

cabinet.

s Leave space around the TV set as shown below.

s It is strongly recommended that you use a Sony wall-mount

bracket in order to provide adequate air-circulation.

Installed on the wall

Installed with stand

s To ensure proper ventilation and prevent the collection of dirt

or dust:

– Do not lay the TV set flat, install upside down, backwards,

or sideways.

– Do not place the TV set on a shelf, rug, bed or in a closet.

– Do not cover the TV set with a cloth, such as curtains, or

items such as newspapers, etc.

– Do not install the TV set as shown below.

AC power cord

Handle the AC power cord and outlet as follows in order to avoid

any risk of fire, electrical shock or damage and/or injuries:

– Use only Sony supplied AC power cords, not those of other

brands.

– Insert the plug fully into the AC power outlet.

– Operate the TV set on a 220–240 V AC supply only.

– When wiring cables, be sure to unplug the AC power cord for

your safety and take care not to catch your feet on the cables.

– Disconnect the AC power cord from the AC power outlet before

working on or moving the TV set.

– Keep the AC power cord away from heat sources.

– Unplug the AC power plug and clean it regularly. If the plug is

covered with dust and it picks up moisture, its insulation may

deteriorate, which could result in a fire.

Mounting Hook

Hook attachment on rear of TV set

Screw (supplied with the Wall-mount

bracket)

8 mm - 12 mm

Be sure to hold the bottom of

the panel, not the front part.

Do not handle with dent area.

Do not handle with the

transparent bottom part.

30 cm

10 cm

Leave at least this space around the set.

30 cm

10 cm 10 cm

6 cm

Leave at least this space around the set.

Air circulation is blocked.

Wall Wall

(Continued)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 39 40

Comments to this Manuals

No comments

Sony KDL-40V4000 User Manual Page 9

Comments to this Manuals

Related products and manuals for LCD TVs Sony KDL-40V4000