Sony CMT-HPR90 User Manual download pdf (Page 2)

CMT-HPR90.GB.2-668-124-11(1)

Other Operations

Creating your own CD program

(Program Play)

Use buttons on the remote to create your own program.

1 Press CD



to select the CD function.

2 Press PLAY MODE



repeatedly until “PGM”

appears while the player is stopped.

3 Press DISC SKIP



to select a disc.

4 Press /



repeatedly or turn the jog

dial



on the unit until the desired track number

appears.

When programming “ATRAC” ﬁles or MP3 ﬁles,

press +/– (select folder)



repeatedly or turn the

jog dial



on the unit to select the desired folder, and

then select the desired ﬁle.

Current disc

Loaded disc

5 Press ENTER



to add the track or ﬁle to the

program.

“– –.– –” appears when the total time exceeds 100

minutes for a CD, or when you select a CD track

whose number is 21 or over, or when you select an

“ATRAC” ﬁle or MP3 ﬁle.

6 Repeat steps 4 through 5 to program additional

tracks or ﬁles, up to a total of 25 tracks or ﬁles.

7 To play your program of tracks or ﬁles, press 

(play) .

The program remains available until you open the disc

tray. To play the same program again, select the CD

function, and press  (play)



To cancel Program Play

Press PLAY MODE



repeatedly until “PGM”

disappears while the player is stopped.

To delete the last track or ﬁle of the program

Press CLEAR



while the player is stopped.

To view program information, such as total

track number of the program

Press DISPLAY



repeatedly.

Tip

You can program additional tracks or ﬁles during playback by using

the jog dial.

Presetting radio stations

You can preset your favorite radio stations and tune

them in instantly by selecting the corresponding preset

number.

Use buttons on the remote to preset stations.

1 Tune in the desired station (see “Listening to the

radio”).

2 Press TUNER MEMORY



Preset number

3 Press +/–



repeatedly to select your desired

preset number.

If another station is already assigned to the selected

preset number, the station is replaced by the new

stations.

4 Press ENTER



5 Repeat steps 1 through 4 to store other stations.

You can preset up to 20 FM and 10 AM stations. The

preset stations are retained for about half a day even

if you disconnect the power cord or if a power failure

occurs.

6 To call up a preset radio station, press TUNING

MODE



repeatedly until “PRESET” appears,

and then press +/–



repeatedly to select the

desired preset number.

Using the Timers

The system offers two timer functions. If you use Play

Timer with the Sleep Timer, the Sleep Timer has priority.

Sleep Timer:

You can fall asleep to music. This function works even if

the clock is not set.

Press SLEEP



on the remote repeatedly. If you select

“AUTO,” the system automatically turns off after the

current disc stops or in 100 minutes.

Play Timer:

You can wake up to CD or tuner at a preset time.

Use buttons on the remote to control the Play Timer.

Make sure you have set the clock.

1 Prepare the sound source.

Prepare the sound source, and then press VOLUME

+/–



to adjust the volume.

To start from a speciﬁc CD track, “ATRAC” ﬁle or

MP3 ﬁle, create your own CD program.

2 Press CLOCK/TIMER SET



3 Press /



repeatedly to select “PLAY

SET” then press ENTER



“ON” appears, and the hour indication ﬂashes.

4 Set the time to start playing.

Press /



repeatedly to set the hour,

and then press ENTER



The minute indication ﬂashes. Use the procedure

above to set the minute.

5 Use the same procedure as in step 4 to set the

time to stop playing.

6 Select the sound source.

Press /



repeatedly until the desired

sound source appears, and then press ENTER



. The

display shows the timer settings.

7 Press  (power)



to turn off the system.

The system turns on 15 seconds before the preset

time. If the system is on at the preset time, the Play

Timer will not play.

To activate or check the timer again

Press CLOCK/TIMER SELECT



, press /



repeatedly until “PLAY SEL” appears, and then press

ENTER



To cancel the timer

Repeat the same procedure as above until “TIMER OFF”

appears, and then press ENTER



To change the setting

Start over from step 1.

Tip

The Play Timer setting remains as long as the setting is not canceled

manually.

Troubleshooting

1 Make sure the power cord and speaker cords are

correctly and ﬁrmly connected.

2 Find your problem in the checklist below, and

take the indicated corrective action.

If the issue persists, contact your nearest Sony dealer.

If the STANDBY indicator ﬂashes

Immediately unplug the power cord, and check the

following item.

• If your system has a voltage selector, is the voltage

selector set to the correct voltage?

• Are you using only the supplied speakers?

• Is anything blocking the ventilation holes on the rear

of the system?

After the STANDBY indicator



stops ﬂashing,

reconnect the power cord, and turn on the system. If

the issue persists, contact your nearest Sony dealer.

General

The display starts ﬂashing as soon as you

plug in the power cord even though you

have not turned on the system.

• Press DISPLAY



twice while the system is off. The

demonstration disappears.

Sound comes from one channel, or the left

and right volumes are unbalanced.

• Place the speakers as symmetrically as possible.

• Connect only the supplied speakers.

Severe hum or noise.

• Move the system away from sources of noise.

• Connect the system to a different wall socket.

• Install a noise ﬁlter (available separately) to the power

cord.

The remote does not function.

• Remove any obstacles between the remote and the

remote sensor



on the unit, and position the unit

away from ﬂuorescent lights.

• Point the remote at the system’s sensor.

• Move the remote closer to the system.

The STANDBY indicator



remains lit after

unplugging the power cord.

• The STANDBY indicator



may not turn off

immediately after unplugging the power cord. This

is not a malfunction. The indicator will turn off after

about 40 seconds.

CD/MP3 player

The sound skips, or the disc will not play.

• Wipe the disc clean, and replace it.

• Move the system to a location away from vibration (for

example, on top of a stable stand).

• Move the speakers away from the system, or place

them on separate stands. At high volume, speaker

vibration may cause the sound to skip.

Play does not start from the ﬁrst track.

• Return to Normal Play by pressing PLAY MODE



repeatedly until both “PGM” and “SHUF” disappear.

Starting playback takes more time than usual.

• The following discs take a longer time to start playback.

– a disc recorded with a complicated tree structure.

– a disc recorded in multisession mode.

– a disc that has not been ﬁnalized (a disc to which data

can be added).

– a disc that has many folders.

Tuner

Severe hum or noise, or stations cannot be

received.

• Connect the antenna properly.

• Find a location and an orientation that provide good

reception, and then set up the antenna again.

• Keep the antennas away from the speaker cords and the

power cord to avoid picking up noise.

• Connect a commercially available external antenna.

• Consult your nearest Sony dealer if the supplied AM

antenna has come off the plastic stand.

• Turn off nearby electrical equipment.

To change the AM tuning interval

The AM tuning interval is factory-preset to 10 kHz.

Use buttons on the unit to change the AM tuning interval.

1 Tune in any AM station, and then turn off the

system.

2 While holding down 



, press 

(power)



All the AM preset stations are erased. To reset the

interval to the factory preset, repeat the procedure.

You cannot change the AM tuning interval in Power

Saving Mode.

o improve tuner reception

Turn off CD player power by using the CD power

management function. By default, CD power is turned on.

You cannot change the setting in Power Saving Mode.

Use buttons on the unit to turn off CD player power.

1 Press CD/ (play/pause)



to select the CD

function.

2 Press  (power)



to turn off the system.

3 After “STANDBY” stops ﬂashing, press 

(power)



while holding ENTER



“CD POWER” and “OFF” appear. With CD player

power turned off, disc access time is increased. To

turn on CD player power, repeat the procedure until

“CD POWER” and “ON” appear.

To reset the system to factory settings

If the system still does not operate properly, reset the

system to factory settings. You cannot reset the system to

factory settings in Power Saving Mode.

Use buttons on the unit to reset the unit to its factory

default settings.

1 Disconnect and reconnect the power cord, and

then turn on the system.

2 Press PLAY MODE/TUNING MODE



DISPLAY



and  (power)



at the same

time.

All user-conﬁgured settings, such as preset radio

stations, timer, and the clock, are deleted.

Messages

CANT LOCK : The system cannot be locked after

you have done the procedure of “When carrying this

system.” Turn the power off and then on again by

pressing  (power )



on the unit, then perform

the procedure.

CD OVER : You have reached the end of the disc while

pressing  (fast forward)



during playback or

pause.

COMPLETE : The preset operation ended normally.

LOCKED : The disc tray does not open. Contact your

nearest Sony dealer.

NO DISC : There is no disc in the player, or you have

loaded a disc that cannot be played.

NOT IN USE : You pressed an invalid button.

PUSH SELECT : You tried to set the clock or timer

during timer operation.

PUSH STOP : You pressed PLAY MODE



during

playback.

SET CLOCK : You tried to select the timer when the

clock is not set.

SET TIMER : You tried to select the timer when the

Play Timer is not set.

STEP FULL : You tried to program more than 26 tracks

or ﬁles (steps).

TIME NG : The Play Timer start and end times are set to

the same time.

Display examples

Display indicates

2 (two)

5 (ﬁve)

6 (six)

8 (eight)

0 (zero)

! or |

”

Precautions

Discs that this system CAN play

• Audio CD

• CD-R/CD-RW (audio data/“ATRAC” ﬁles/MP3 ﬁles)

Discs that this system CANNOT play

• CD-ROM

• CD-R/CD-RW other than those recorded in music

CD format or “ATRAC” format and MP3 format

conforming to ISO9660 Level 1/Level 2, Joliet or

multisession

• CD-R/CD-RW recorded in multisession that have not

ended by “closing the session”

• CD-R/CD-RW of poor recording quality, CD-R/CD-

RW that have scratches or are dirty, or CD-R/CD-RW

recorded with an incompatible recording device

• CD-R/CD-RW which is ﬁnalized incorrectly

• Discs containing ﬁles other than MPEG 1 Audio Layer-

3 (MP3) ﬁles

• Discs of non-standard shape (for example, heart,

square, star)

• Discs that have adhesive tape, paper, or sticker attached

to them

• Rental or used discs with attached seals where the glue

extends beyond the seal

• Discs that have labels printed using ink that feels tacky

when touched

Notes on discs

• Before playing, wipe the disc with a cleaning cloth

from the center out to the edge.

• Do not clean discs with solvents, such as benzine

thinner, or commercially available cleaners or anti-

static spray intended for vinyl LPs.

• Do not expose discs to direct sunlight or heat sources

such as hot air ducts, nor leave it in a car parked in

direct sunlight.

On safety

• The unit is not disconnected from the AC power source

(mains) as long as it is connected to the wall socket,

even if the unit itself has been turned off.

• Completely disconnect the power cord (mains lead)

from the wall socket (mains) if it is not going to be

used for an extended period of time. When unplugging

the unit, always grip the plug. Never pull the cord

itself.

• Should any solid object or liquid get into the system,

unplug the system, and have it checked by qualiﬁed

personnel before operating it again.

• The AC power cord can be changed only by a qualiﬁed

service facility.

On placement

• Do not place the system in an inclined position or in

locations that are extremely hot, cold, dusty, dirty, or

humid or lacking adequate ventilation, or subject to

vibration, direct sunlight or a bright light.

• Be careful when placing the unit or speakers on

surfaces that have been specially treated (for example,

with wax, oil, polish) as staining or discoloration of the

surface may result.

• If the system is brought directly from a cold to a warm

location or is placed in a very damp room, moisture

may condense on the lens inside the CD player, and

cause the system to malfunction. In this situation,

remove the disc, and leave the system turned on for

about a few hours until the moisture evaporates.

On heat buildup

• Heat buildup on the unit during operation is normal and

is not cause for alarm.

• Do not touch the cabinet if it has been used

continuously at a high volume because the cabinet may

have become hot.

• Do not obstruct the ventilation holes.

On the speaker system

This speaker system is not magnetically shielded, and

the picture on nearby TV sets may become magnetically

distorted. In this situation, turn off the TV, wait 15 to 30

minutes, and turn it back on.

If there is no improvement, move the speakers far away

from the TV.

Cleaning the cabinet

Clean this system with a soft cloth slightly moistened

with a mild detergent solution. Do not use any type

of abrasive pad, scouring powder, or solvent, such as

thinner, benzine, or alcohol.

Speciﬁcations

Main unit

AUDIO POWER SPECIFICATIONS

POWER OUTPUT AND TOTAL HARMONIC DISTORTION:

With 4 ohm loads, both channels driven, from 120 – 10,000 Hz; rated 85 watts

per channel minimum RMS power, with no more than 10% total harmonic

distortion from 250 milliwatts to rated output.

Ampliﬁer section

North American model

DIN power output (rated): 68 + 68 W (4 ohms at 1 kHz, DIN)

Continuous RMS power output (reference): 85 + 85 W (4 ohms at 1 kHz,

10% THD)

Inputs

AUDIO IN: Sensitivity 250 mV, impedance of 47 kilohms

Outputs

PHONES (stereo mini jack): accepts headphones with an impedance of 8

ohms or more

SPEAKER: accepts impedance of 4 ohms

CD player section

System: Compact disc and digital audio system

Laser Diode Properties

Emission Duration: Continuous

Laser Output*: Less than 44.6 µW

* This output is the value measurement at a distance of 200 mm from the

objective lens surface on the Optical Pick-up Block with 7 mm aperture.

Frequency response: 20 Hz – 20 kHz (±2 dB)

Wavelength: 780 – 790 nm

Selected track

or ﬁle number

Total playing time of program

(including selected track or ﬁle)

Tuner section

FM stereo, FM/AM superheterodyne tuner

FM tuner section:

Tuning range: 87.5 – 108.0 MHz

Antenna: FM lead antenna

Antenna terminals: 75 ohms unbalanced

Intermediate frequency: 10.7 MHz

AM tuner section:

Tuning range: 530 – 1,710 kHz (with 10 kHz tuning interval)

531 – 1,710 kHz (with 9 kHz tuning interval)

Antenna: AM loop antenna

Antenna terminals: External antenna terminal

Intermediate frequency: 450 kHz

Speaker

Speaker system: 2-way, bass-reﬂex type

Speaker units

Woofer: 13 cm dia., cone type

Tweeter: 4 cm dia., cone type

Nominal impedance: 4 ohms

Dimensions (w/h/d): Approx. 174 × 280 × 258 mm

Mass: Approx. 2.6 kg net per speaker

General

Power requirements: 120 V AC, 60 Hz

Power consumption: 45 watts

Dimensions (w/h/d) (excl. speakers): Approx. 180 × 280 × 360 mm

Mass (excl. speakers): 3.9 kg

Supplied accessories: Remote Commander (1)/R6 (Size AA) batteries (2)/AM

loop antenna (1)/FM lead antenna (1)

US and foreign patents licensed from Dolby Laboratories.

Design and speciﬁcations are subject to change

without notice.

• Standby power consumption: 0.5 W

• Halogenated ﬂame retardants are not used in the

certain printed wiring boards.

• Lead-free solder is used for soldering certain parts.

• Halogenated ﬂame retardants are not used in cabinets.

(Except for the United States model)

1 2

Comments to this Manuals

No comments

Sony CMT-HPR90 User Manual Page 2

Comments to this Manuals

Related products and manuals for Home audio sets Sony CMT-HPR90