Sony XC-ES50/50CE User Manual download pdf (Page 5)

3

XC-E series

MAIN SPECIFICATIONS

Image pickup device

XC-ES50/50CE, XC-EI50/50CE:

1/2-inch interline transfer CCD

XC-ES30/30CE, XC-EI30/30CE:

1/3-inch interline transfer CCD

Number of effective pixels

XC-ES50/EI50, XC-ES30/EI30:

768 (H)x494 (V)

XC-ES50CE/EI50CE, XC-ES30CE/EI30CE:

752 (H)x582 (V)

CCD horizontal driving frequency

XC-ES50/EI50, XC-ES30/EI30:

14.318 MHz

XC-ES50CE/EI50CE, XC-ES30CE/EI30CE:

14.187 MHz

CCD vertical driving frequency

XC-ES50/EI50, XC-ES30/EI30:

15.734 kHz

XC-ES50CE/EI50CE, XC-ES30CE/EI30CE:

15.625 kHz

Signal system EIA/CCIR

Cell size

XC-ES50/EI50: 8.4 (H)x9.8 (V) µ m

XC-ES50CE/EI50CE: 8.6 (H)x8.3 (V) µ m

XC-ES30/EI30: 6.35 (H)x7.4 (V) µ m

XC-ES30CE/EI30CE: 6.5 (H)x6.25 (V) µ m

Lens mount C-mount

Flange back 17.526 mm

Synchronization system

Internal/external

(Selected automatically)

External sync input/output

HD/VD (2 to 5 Vp-p)

*

Automatically selected according

to the existence of an input signal

when the selection switch on the rear

panel is set to EXT.

Allowable frequency deviation of external synchronization

± 1 %

(in horizontal synchronous frequency)

Jitter Within ± 50 nsec

Scanning system 2:1 interlacing

Non-interlacing

(during external sync input)

Horizontal resolution

XC-ES50/EI50, XC-ES30/EI30: 570 TV lines

XC-ES50CE/EI50CE, XC-ES30CE/EI30CE:

560 TV lines

Sensitivity

XC-ES50/50CE: 400 lx F5,6 (γ =ON, MIN Gain,

without IR cut filter)

XC-ES30/30CE: 400 lx F4 (γ =ON, MIN Gain,

without IR cut filter)

XC-EI50/50CE: 400 lx F11 (γ =OFF, MIN Gain,

without IR cut filter)

XC-EI30/30CE: 400 lx F8 (γ =ON, MIN Gain,

without IR cut filter)

S/N ratio 60dB

Minimum illuminance

XC-ES50/50CE, XC-ES30/30CE:

0.3 lx (F1.4 γ =ON, MAX Gain,

without IR cut filter)

XC-EI50/50CE: 0.1 lx (F1.4 γ =ON, MAX Gain,

without IR cut filter)

XC-EI30/30CE: 0.2 lx (F1.4 (γ =ON, MAX Gain,

without IR cut filter)

Gain AGC/Manual (Can be selected using

the switch on the rear panel.)

Gamma correction ON/OFF (Can be selected

using the switch on the rear

panel.)

Electronic shutter

XC-ES50/EI50, XC-ES30/EI30:

1/100 to 1/10,000 seconds

XC-ES50CE/EI50CE, XC-ES30CE/EI30CE:

1/120 to 1/10,000 seconds

External trigger shutter

XC-ES50/EI50, XC-ES30/EI30:

1/4 to 1/10,000 seconds

XC-ES50CE/EI50CE, XC-ES30CE/EI30CE:

1/4 to 1/8,000 seconds

*

Set using the DIP switch on the rear panel, or

variable with the trigger pulse width.

Supply voltage +12 VDC (+9.0V to 16V)

Power consumption

XC-ES30/30CE, XC-EI30/30CE: 1.4W

XC-ES50/50CE, XC-EI50/50CE: 1.6W

Operating temperature

–5 ˚C to +45 ˚C

Storage temperature –20 ˚C to +60 ˚C

Performance assurance temperature

0 ˚C to +30 ˚C

Operating humidity 20 to 80 % (Non-condensing)

Storage humidity 20 to 95 % (Non-condensing)

Vibration resistance

10G (For 20 minutes in the X, Y,

and Z directions at 20 to 200 Hz)

1 2 3 4 5 6 7 8 9 10 ... 38 39

Comments to this Manuals

No comments