Sony SFM3 Installation Manual download pdf (Page 7)

SFM3

Installation Manual Page - 7 -

Griplate™

1. The Griplate™ have M4, M5, M6 and M8 hole patterns to fit the hardware that the flat panel requires.

Example: If your display uses M8 x 20 Phillips head screws. Use the M8 mounting points (Figure 5).

Figure 5. Griplate™ Orientation

2. Once the mounting brackets are aligned, secure the Griplate™ to the flat panel.

NOTE: The dimples of the top plates have to be facing up and the bottom dimples must be facing down. Use

(1) Griplate™ per mounting point (Figure 6).

CAUTION: Do not over tighten the mounting hardware.

DIMPLES

FACING UP

3/4"

DIMPLES

FACING UP

DIMPLES

FACING DOWN

DIMPLES

FACING DOWN

Figure 6. Griplate™ Attachment

Dimples

Phillips Screw

Drive

Bottom Flat Panel

1 2 3 4 5 6 7 8 9 10 11 12 13 14

No comments

Sony SFM3 Installation Manual Page 7