Sony HVL-F36AM User Manual download pdf (Page 28)

Wireless flash mode (WL)

Photographs taken with the flash attached to the camera are flat as shown

in photo 1. In such cases, remove the flash from the camera and position

it to obtain a more three-dimensional effect as shown in photo 2.

When taking this type of photograph with a single lens reflex camera, the

camera and the flash unit are most commonly connected by a cable. This

flash eliminates the need for a cable to transmit signals to the flash unit by

using the light of the built-in flash itself as a signal. The correct exposure is

determined automatically by the camera.

Normal flash Wireless flash

Wireless Flash Range

The wireless flash uses a light signal from the built-in flash as a trigger to

operate the off-camera flash unit. Follow the points below when

positioning the camera, flash, and subject.

• Photograph in dark locations indoors.

• Place the off-camera flash within the gray area in the following diagram.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 211 212

No comments

Sony HVL-F36AM User Manual Page 28