Sony RDR-HX750 Operations Instructions download pdf (Page 55)

55

Timer Recording

7 Select the input source using M/m,

and select the programme position

using the number buttons or M/m.

You can also select the programme

position using the yellow button

(“Channels”).

8 Press the green button (“Next”).

The display for entering characters

appears.

To change the title name, select a

character on the keyboard using </M/

m/,, and press ENTER.

To switch between upper-case, lower-

case, or characters with accents, press the

yellow button (“Keyboard”).

9 Press the green button (“Save”).

The date, start and stop times,

programme position, etc. settings appear.

The recorder is ready to start recording.

To confirm, change, or cancel a timer

recording

See “Checking/Changing/Cancelling Timer

Settings” on page 57.

To stop recording during timer recording

Press x REC STOP.

Note that it may take a few seconds for the

recorder to stop recording.

On-screen instructions may appear after

pressing x REC STOP. In this case, follow

the on-screen instructions.

Rec. Mode Adjust

If there is not enough available disc space for

the recording, the recorder automatically

adjusts the recording mode to enable the

entire programme to be recorded. Set “Rec.

Mode Adjust” to “On” in the “Recording”

setup (page 120).

You can set the recorder to record in 30-

minute increments.

Press z REC repeatedly to set the

duration.

Each press advances the time in 30-minute

increments. The maximum duration is six

hours.

The time counter decreases minute by minute

to 0:00, then the recorder stops recording (the

power turns off).

To cancel the Quick Timer

Press z REC repeatedly until the counter

appears in the front panel display. The

recorder returns to normal recording mode.

To stop recording, press x REC STOP.

b Note

If you turn off the recorder during recording,

recording is stopped.

Using the Quick Timer function

(normal recording)

,continued

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 147 148

Comments to this Manuals

No comments