Sony RDR-HX510 User Manual download pdf (Page 57)

Playback

“Audio Filter”: Selects the digital filter to

reduce noise above 22.05 kHz (Fs* is 44.1

kHz), 24 kHz (Fs is 48 kHz), or 48 kHz (Fs is

above 96 kHz).

• Sharp (default): Provides a wide frequency

range and spatial feeling.

• Slow: Provides smooth and warm sound.

“AV SYNC”: When the video is delayed, this

function delays the audio for synchronization

with the video (0 to 120 milliseconds). Larger

numbers indicate a longer audio delay for

synchronization with the video. When

dubbing to a VCR or other video recording

equipment, be sure to return this setting to 0

ms (default).

* Sampling frequency of audio source. This

function only adjusts the output signals from the

LINE 1 – TV, LINE 3/DECODER, or LINE 2

OUT (AUDIO L/R).

3 Press </M/m/, to select the option,

and press ENTER.

b Note

There may be little effect by changing the Audio Filter

depending on the disc or playback environment.

You can pause a current TV broadcast, and then

continue watching the programme at a later time.

This is useful when you receive an unexpected

phone call or visitor while watching TV.

1 While viewing a TV broadcast with this

recorder, press X.

The picture pauses. You can pause the picture

for up to three hours.

2 Press X or H again to resume watching

the programme.

b Notes

• Paused titles are not saved to the HDD.

• This function is cancelled when:

– x (stop) is pressed.

– PROG +/– is pressed.

– DVD is pressed.

– Z (open/close) is pressed.

– TITLE LIST is pressed.

– INPUT SELECT is pressed.

– the recorder is turned off.

– a timer recording or Synchro Recording is started.

– the PDC/VPS function is “On” and channel scan is

started.

– regular dubbing is started.

• It may take a few seconds to resume playback of the

paused programme.

• Even if you fast forward the recorded programme,

there will always be a time difference of about one

minute or more between the recorded programme and

the current TV broadcast.

“Chasing Playback” allows you to view the

recorded part of a programme while the recording

is being made. You do not need to wait until the

recording finishes.

Press TOOLS while recording to select

“Chasing Playback,” and press ENTER.

Playback starts from the beginning of the

programme you are recording.

When you fast forward to the point that you are

recording, Chasing Playback returns to normal

playback.

b Notes

• For DVD-RWs (VR mode), this function does not

work when recording:

– on a 1x-speed DVD-RW.

– in the HQ or HSP recording mode.

• The DVD’s picture on your TV screen freezes for a few

seconds when you fast forward/fast reverse or instant

replay/advance the recording.

• Chasing Playback is possible from one minute or more

after recording starts.

• Even if you fast forward the recorded programme,

there will always be a time difference of about one

minute or more between the recorded programme and

the current TV broadcast.

Pausing a TV Broadcast (TV Pause)

News ABCD 9

Stereo

TV pause

Playing from the beginning of the

programme you are recording

(Chasing Playback)

HDD

RWVR

,continued

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 107 108

Comments to this Manuals

No comments

Sony RDR-HX510 User Manual Page 57

Comments to this Manuals

Related products and manuals for DVD players Sony RDR-HX510