Sony RDR-HX1010 Operations Instructions Page 78

  • Download
  • Add to my manuals
  • Print
  • Page
    / 116
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 77
78
3 Press INPUT SELECT on the remote
repeatedly to select “DV.”
The front panel display changes as follows:
4 Press REC MODE on the remote repeatedly
to select the recording mode.
The recording mode changes as follows:
For details about the recording mode, see
page 41.
5 Press TOOLS on the remote to select “DV
Audio Input,” and press ENTER. Then,
select the setting for the audio input.
“Stereo1” (default): Records original sound
only. Normally select this when dubbing a DV
format tape.
“Mix”: Records both stereo 1 and 2.
“Stereo2”: Records additional audio only.
Select “Mix” or “Stereo2” only if you have
added a second audio channel when recording
with your digital video camera.
You are ready to start dubbing. Select one of
the dubbing methods on the following pages.
z Hints
You can turn off the recorder during dubbing. The
recorder completes dubbing even after being turned
off.
You can adjust the settings for the recording picture
before recording. See “Adjusting the recording picture
quality and size” on page 47.
b Notes
You cannot connect more than one piece of digital
video equipment to the recorder.
You cannot control the recorder using another device
or another recorder of the same model.
You cannot record date, time, or the contents of the
cassette memory onto the disc.
If you record from a DV/Digital8 format tape that is
recorded in multiple sound tracks, such as a tape with
multiple sampling frequencies (48 kHz, 44.1 kHz, or
32 kHz), no sound or an unnatural sound will be output
when playing back the sampling frequency switch
point on the disc.
In order to use this recorder’s “Auto Chapter” setting
(page 79), be sure to correctly set the clock on your
digital video camera before shooting.
The recorded picture may be momentarily affected if
the picture size of the source image changes, or if there
is nothing recorded on the tape.
L2L1 L4L3 DV
Programme
position
HQ SPHSP
LSP
SEP EPSLP
LP
Page view 77
1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 115 116

Comments to this Manuals

No comments