Sony MHC-RV888D User Manual download pdf (Page 58)

Use buttons on the unit for the operation.

1 Connect audio cords.

See “Hooking up optional components” on

page 56.

2 Press VIDEO/SAT to switch the

function to VIDEO or SAT.

Start playing the connected component.

Notes

• If you cannot select “SAT” by pressing VIDEO/SAT

repeatedly, hold down VIDEO/SAT and then press

?/1 while the power is on. The function will change

from “VIDEO” to “SAT”, and “SAT” will appear in

the display. To change back to “VIDEO”, repeat the

same procedure.

• If the sound is distorted or too loud when “VIDEO”

is selected or you want to switch back to “SAT”,

repeat the operation described above to switch to

“SAT”.

• You cannot switch the VIDEO/SAT function in

Power Saving Mode (page 51).

1 Connect a digital optical cord.

See “Hooking up optional components” on

page 56.

2 Connect 6 speakers to an AV amplifier

equipped with a decoder.

For the speaker placement, refer to the

operating instructions supplied with the

connected amplifier.

3 Switch the output to 5.1 channel Dolby

Digital sound or 5.1 channel DTS

sound.

See “Changing the sound/subtitle/

language” on page 25.

Tip

You cannot use the surround effect of this system.

Listening to audio from a

connected component

Enjoying the 5.1 channel

sound with the optional

amplifier

(MHC-RV777D only)

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 79 80

No comments

Sony MHC-RV888D User Manual Page 58