Sony DVP-SR200P User Manual download pdf (Page 28)

28

◆ BLACK LEVEL

Selects the black level (setup level) for the

video signals output from the jacks other than

COMPONENT VIDEO OUT. You cannot

select this when the player outputs PAL

system signals.

◆ BLACK LEVEL (COMPONENT OUT)

Selects the black level (setup level) for the

video signals output from the COMPONENT

VIDEO OUT jacks. You cannot select this

when the player outputs PAL system or

progressive signals (page 28).

◆ PROGRESSIVE (COMPONENT OUT

ONLY)

If your TV accepts progressive (525p/625p)

format signals, set “PROGRESSIVE

(COMPONENT OUT ONLY)” to “ON.”

Note that you must connect to a progressive

format TV using the COMPONENT VIDEO

OUT jacks (page 9).

To output progressive signals

1 Select “PROGRESSIVE

(COMPONENT OUT ONLY),” and

press ENTER.

2 Select “ON,” and press ENTER.

The display asks for confirmation.

3 Select “Start,” and press ENTER.

The video switches to a progressive

signal for 5 seconds.

4 If the picture appears normal, select

“YES,” and press ENTER.

If not, select “NO,” and press ENTER.

To reset the setting

If the picture does not appear normal or goes

blank, press [/1 to turn off the player, and

enter “369” using the number buttons on the

remote, then press [/1 to turn on the player

again.

◆ MODE (PROGRESSIVE)

In order for these images to appear natural on

your screen when output in progressive

mode, the progressive video signal needs to

be converted to match the type of DVD

software that you are watching.

This setting is effective only when you set

“PROGRESSIVE (COMPONENT OUT

ONLY)” in “SCREEN SETUP” to “ON.”

◆ 4:3 OUTPUT

This setting is effective only when you set

“TV TYPE” in “SCREEN SETUP” to

“16:9.”

Adjust this to watch 4:3 aspect ratio

progressive signals. If you can change the

aspect ratio on your progressive format

(525p/625p) compatible TV, change the

setting on your TV, not the player. This

setting is effective only when

“PROGRESSIVE (COMPONENT OUT

ONLY)” is set to “ON” in “SCREEN

SETUP.”

ON Sets the black level of the output

signal to the standard level.

OFF Lowers the standard black level.

Use this when the picture

becomes too white.

OFF

Sets the black level of the output

signal to the standard level.

Normally select this position.

ON Raises the standard black level.

Use this setting when the

picture appears too dark.

OFF

To output normal (interlace)

signals.

ON To output progressive signals.

AUTO Automatically detects the

software type (film-based or

video-based) and selects the

appropriate conversion mode.

Normally, select this position.

VIDEO Fixes the conversion mode to

the mode for video-based

software.

FULL

Select this when you can

change the aspect ratio on your

TV.

NORMAL Select this when you cannot

change the aspect ratio on your

TV. Shows a 16:9 aspect ratio

signal with black bands on left

and right sides of the image.

16:9 aspect ratio TV

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 39 40

Comments to this Manuals

No comments