Sony DVP-S9000ES User Manual download pdf (Page 14)

Getting Started

5.1 Channel Surround Hookups

With DVDs which contain DTS, Dolby Digital or MPEG

audio sound, you can enjoy the surround sound while

producing the effect of being in a movie theater or a

concert hall using a digital component with a built-in

DTS, MPEG audio or Dolby Digital decoder (not

supplied). The player outputs the surround sound signals

from the DIGITAL OUT OPTICAL and COAXIAL

connectors.

Using a receiver (amplifier) having the OPTICAL or

COAXIAL connector and 6 speakers, you can enjoy even

greater real audio presence in the comfort of your own

home.

Required cords

Optical digital connecting cord* (not supplied) (1)

Coaxial digital (75 Ω) connecting cord* (not supplied) (1)

S video cord (supplied) (1)

* Connect the component via the DIGITAL OUT OPTICAL or

COAXIAL connector using an optical or coaxial digital

connecting cord (not supplied). You do not need to connect

both of these cords. See the figure on the next page.

Do not connect the mains lead to a switched mains such

as the mains on a receiver (amplifier). Doing so may cause

the Playback Memory, Disc Memo and menu settings to be

cancelled when you turn off the receiver.

Notes

• Do not connect the mains lead to a mains or press the POWER

switch before completing all connections.

• Refer to the instructions supplied with the component to be

connected.

• The cord connectors should be fully inserted into the jacks. A

loose connection may cause hum and noise.

• SACD audio signals are not output from the DIGITAL OUT

OPTICAL or COAXIAL connectors.

Setups for the player

Some setup adjustments are necessary for the player

depending on the components to be connected.

Use the setup display to change the various settings.

For details on using the setup display, see page 50.

• When you connect an audio component with a built-

in Dolby Digital decoder A

Set “DIGITAL OUT” in “AUDIO SETUP” to “ON” and

then set “DOLBY DIGITAL” to “DOLBY DIGITAL” in

the setup display. (page 62, 63)

• When you connect an audio component with a built-

in MPEG audio decoder B

Set “DIGITAL OUT” in “AUDIO SETUP” to “ON” and

then set “MPEG” to “MPEG” in the setup display. (page

62, 63)

• When you connect an audio component with a built-

in DTS decoder C

Set “DIGITAL OUT” in “AUDIO SETUP” to “ON” and

then set “DTS” to “ON” in the setup display. (page 62,

63)

• When you connect an audio component that accept

the 96kHz/24bit audio signal D

Set “DIGITAL OUT” in “AUDIO SETUP” to “ON” and

then set “48kHz/96kHz PCM” to “96kHz/24bit” in the

setup display. (page 62, 63)

Notes

• When you do not connect an audio component with a

built-in Dolby Digital decoder, do not set “DOLBY DIGITAL”

to “DOLBY DIGITAL.”

• When you do not connect an audio component with a

built-in DTS decoder, do not set “DTS” to “ON.”

• When you do not connect an audio component with a

built-in MPEG audio decoder, do not set “MPEG” to

“MPEG.”

• When you do not connect an audio component that cannot

accept the 96kHz/24bit audio signal, do not set “48kHz/

96kHz PCM” to “96kHz/24bit.”

AUDIO SETUP

AUDIO ATT:

AUDIO DRC:

AUDIO FILTER

DOWNMIX

DIGITAL OUT:

To set, press , then .

To quit, press .

OFF

STANDARD

SHARP

DOLBY SURROUND

ENTER

DOLBY DIGITAL:

DTS:

DOLBY DIGITAL

MPEG:

MPEG

48kHz/96kHz PCM:

96kHz/24bit

DISPLAY

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 83 84

Comments to this Manuals

No comments

Sony DVP-S9000ES User Manual Page 14

Comments to this Manuals

Related products and manuals for DVD players Sony DVP-S9000ES