Sony DVP-S560D User Manual download pdf (Page 11)

Getting Started

Note

You cannot enjoy a picture with an S video signal if your TV does

not conform to the S video signal. When your TV does not have

an S VIDEO input, connect the component via the VIDEO INPUT

connector using the supplied audio/video connecting cord

instead of the S video cord. For details, see page 8.

Refer to the instructions supplied with your TV.

Setups for the player when using the

digital connecting cords

Connect the component via the DIGITAL OUT OPTICAL

or COAXIAL connector using an optical or coaxial digital

connecting cord (not supplied). You do not need to use

the audio connecting cord.

Some setup adjustments are necessary for the player

depending on the components to be connected.

Use the setup display to change the various settings.

For details on using the setup display, see page 46.

If your receiver (amplifier) does not have a built-

in Dolby* Digital decoder or DTS decoder

• To listen to the sound through speakers connected

to a receiver (amplifier) which has a digital

connector, or to output the sound to a digital

component such as a DAT or MD deck

Set the “AUDIO SETUP” items in the setup display

(page 54) as shown in the illustration below. These are

the default settings.

When you have made the connections using an optical or

coaxial digital connecting cord, do not set ”DOLBY

DIGITAL“ to ”DOLBY DIGITAL,“ ”DTS“ to ”ON“ and “48kHz/

96kHz PCM” to “96kHz/24bit.” If you do, a loud noise will

suddenly come out from the speakers, affecting your ears

or causing the speakers to be damaged.

Note

You cannot make direct digital audio recordings of discs recorded

in multichannel surround format using an MD deck or DAT

deck.

If you have an audio component with a built-in

Dolby Digital decoder or DTS decoder

• When you connect an audio component with a built-

in Dolby Digital decoder A

Set “DIGITAL OUT” in “AUDIO SETUP” to “ON” and

then set “DOLBY DIGITAL” to “DOLBY DIGITAL” in

the setup display (page 55).

• When you connect an audio component with a built-

in DTS decoder B

Set “DIGITAL OUT” in “AUDIO SETUP” to “ON” and

then set “DTS” to “ON” in the setup display (page 55).

Notes

• When you do not connect an audio component with a

built-in Dolby Digital decoder, do not set “DOLBY DIGITAL”

to “DOLBY DIGITAL.”

• When you do not connect an audio component with a

built-in DTS decoder, do not set “DTS” to “ON.”

• When you connect the component via the DIGITAL OUT

OPTICAL or COAXIAL connector, the Virtual 3D Surround

effect cannot be heard.

Set the

items as

shown

AUDIO SETUP

AUDIO ATT:

AUDIO DRC:

DOWNMIX:

DIGITAL OUT:

DOLBY DIGITAL:

To set, press , then .

To quit, press .

OFF

STANDARD

DOLBY SURROUND

CENTER SPEAKER EQ:

FLAT

DOLBY DIGITAL

48kHz/96kHz PCM:

48kHz/16bit

DTS:

ENTER

DISPLAY

AUDIO SETUP

AUDIO ATT:

AUDIO DRC:

DOWNMIX:

DIGITAL OUT:

DOLBY DIGITAL:

To set, press , then .

To quit, press .

OFF

STANDARD

DOLBY SURROUND

CENTER SPEAKER EQ:

FLAT

D-PCM

48kHz/96kHz PCM:

48kHz/16bit

DTS:

OFF

ENTER

DISPLAY

* Manufactured under license from Dolby Laboratories.

“Dolby,” “Pro Logic” and the double-D symbol are trademarks

of Dolby Laboratories.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 71 72

Comments to this Manuals

No comments

Sony DVP-S560D User Manual Page 11

Comments to this Manuals

Related products and manuals for DVD players Sony DVP-S560D