Sony DVP-F35P User Manual download pdf (Page 73)

73

Additional Information

Additional Information

Troubleshooting

If you experience any of the following

difficulties while using the player, use this

troubleshooting guide to help remedy the

problem before requesting repairs. Should

any problem persist, consult your nearest

Sony dealer.

Power

The power is not turned on.

, Check that the mains lead is connected

securely.

Picture

There is no picture/picture noise appears.

, Re-connect the connecting cord securely.

, The connecting cords are damaged.

, Check the connection to your TV (page 17)

and switch the input selector on your TV so

that the signal from the player appears on

the TV screen.

, The disc is dirty or flawed.

, If the picture output from your player goes

through your VCR to get to your TV or if

you are connected to a combination TV/

VIDEO player, the copy-protection signal

applied to some DVD programmes could

affect picture quality. If you still experience

problems even when you connect your

player directly to your TV, try connecting

your player to your TV’s S VIDEO input

(page 17).

, The disc is recorded in a colour system that

is different from your TV.

, For non-European models: if the colour

system of your player does not match with

that of your TV, change the colour system

of the player. For details, see page 19. (You

cannot change the colour system of the

DVD disc itself.)

, You have set the NORMAL/

PROGRESSIVE switch to PROGRESSIVE

on the rear panel (the PROGRESSIVE

indicator lights up) even though your TV

cannot accept the progressive signal. In this

case, set the NORMAL/PROGRESSIVE

switch to NORMAL on the rear panel so

that the PROGRESSIVE indicator turns off.

, You set the NORMAL/PROGRESSIVE

switch to PROGRESSIVE on the rear panel

(the PROGRESSIVE indicator lights up)

but did not connect your TV to the player’s

COMPONENT VIDEO OUT jacks using a

component video cord. Set to

PROGRESSIVE only when you connect

your TV to the player’s COMPONENT

VIDEO OUT jacks using a component

video cord (page 17).

, Even if your TV is compatible with

progressive format 525p/625p signals, the

image may be affected when you set the

player to progressive format. In this case,

set the NORMAL/PROGRESSIVE switch

to NORMAL so that the PROGRESSIVE

indicator turns off and the player is set to

normal (interlace) format.

The picture does not fill the screen, even

though the aspect ratio is set in “TY TYPE”

under “SCREEN SETUP.”

, The aspect ratio of the disc is fixed on your

DVD.

The picture is black and white.

, Depending on the TV, the picture on the

screen becomes black and white when you

play a disc recorded in the NTSC colour

system.

Sound

There is no sound.

, Re-connect the connecting cord securely.

, The connecting cord is damaged.

, The player is connected to the wrong input

jack on the amplifier (receiver) (page 22,

23, 24).

, The amplifier (receiver) input is not

correctly set.

, The player is in pause mode or in Slow-

motion Play mode.

, The player is in fast forward or fast reverse

mode.

, If the audio signal does not come through

the DIGITAL OUT (OPTICAL or

COAXIAL) jack, check the audio settings

(page 71).

, When playing multi-channel MPEG audio

sound tracks, only the Front (L) and Front

(R) signals will be output from your two

front speakers.

,continued

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 83 84

Comments to this Manuals

No comments