Sony DAV-DZ150K User Manual download pdf (Page 18)

After connecting the AC power cord (mains

lead), the demonstration appears in the front

panel display. When you press "/1 on the

remote, the demonstration turns off.

Note

• When you press "/1 on the unit, the demonstration

does not turn off.

• When you set the demonstration mode in the system

menu to on, the demonstration does not turn off even

though you press "/1 on the remote. To turn off the

demonstration, set the demonstration mode to off,

then press "/1 on the remote. When the

demonstration mode is set to off, the system saves

power in standby mode.

• If the system is at its factory default settings (ex. after

performing “COLD RESET” (page 79)), you can turn

off the demonstration simply by pressing "/1 on the

remote. Otherwise, to stop the demonstration, you

need to set “DEMO” to “DEMO OFF.”

Setting the demonstration

mode to on/off

1 Press SYSTEM MENU.

2 Press X/x repeatedly until “DEMO”

appears in the front panel display, then

press or c.

3 Press X/x to select a setting.

The default setting is underlined.

• “DEMO ON”

: sets the demonstration

mode to on.

• “DEMO OFF”: sets the demonstration

mode to off.

4 Press .

The setting is made.

5 Press SYSTEM MENU.

The system menu turns off.

Getting Started – ADVANCED –

Turning off the

Demonstration

SYSTEM

"/1

X/x/c,

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 103 104

No comments

Sony DAV-DZ150K User Manual Page 18