Sony DPP-FP90 User Manual download pdf (Page 57)

57

GB

Troubleshooting

Symptom

The image

cannot be

printed fully in

the print range.

Borders

remains.

Even if

“Borders” is set

to “Borderless”,

the image is

printed with

borders on both

sides.

The whole area

of an image

cannot be

printed.

The image is

stretched

horizontally

when printed.

The image is

printed at an

angle.

There are white

lines or dots on

the printed

pictures.

Cause/Solutions

c Set “Borderless” by selecting Menu -

Print setup - Borders. (.page 31)

c Depending on the type of digital

camera used, the aspect ratio of the

recorded image differs, so the image

may not be printed covering the entire

printable area.

c

When you edit and save an image with

“Pattern1” or “Pattern2” settings, it is

saved as a print image including the

blank areas. Even if you print it with

“Borderless” setting, you cannot

eliminate the borders on both sides of a

print. To print without borders, edit

and save an image with “Borderless”

setting. (.page 31)

c You can print the whole area of an

image by selecting “Pattern1” in the

Print setup menu. (.page 31)

c Depending on the type of digital

camera used, the image may be

stretched vertically if it has been

rotated or processed using your

digital camera. This is not because of

trouble with the printer, but because

the image was rewritten with your

digital camera.

c Re-insert the paper tray firmly straight

in to the end.

cThe print head or paper path may be

soiled. Use the supplied cleaning

cartridge and sheet to clean the head

and path.

Check

• Did you select “Pattern1”

or “Pattern2” for

“Borders” in the Print

setup menu?

• Is the aspect ratio of the

image correct?

• Is the image edited and

saved with “Pattern1” or

“Pattern2” settings?

•

Did you set “Pattern1” in

the Print setup menu?

• Did you rotate the image

or add other process?

• Is the paper tray inserted

properly?

Continued

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 83 84

Comments to this Manuals

No comments