Sony VGF-HS1 User Manual download pdf (Page 17)

VGF-HS1 3-298-360-11(1)

Preparation

Hardware Installation and Connection

Preparation

Your Home Server is intended for use on a network.

For detailed instructions on connecting the Home Server to a network, refer to the Setup Guide.



Tip

In a stand-alone environment, the Home Server can provide:



Access to the content of the Home Server from a DLNA device (page 40).



Data import from the USB mass storage class device, such as a digital still camera and a digital camcorder, or a

memory card (page 28).

Sharing your Home Server with 2 or more personal computers

You can access your Home Server from 2 or more personal computers as long as the Home Server and the

computers are connected to the same network. In addition, you can install the PC Link software on each

computer to use the Back Up function (page 32).

Connect the Home Server and the personal computers to the same network.

Install the PC Link software on each computer with the supplied CD-ROM disc and

complete the initial setup of the software.

For further information on the initial setup, refer to the Setup Guide.



Tip

If the Receive folder name for the Back Up function is not unique on the Home Server, a sequential number in

parentheses, (2) or (3) for example, is automatically appended to the end of the folder name.

Precautions on the recovery after power failures

In case of a blackout, or when you unplug the power cord while your Home Server is still on, it will recover

to its previous state. Please note it might take some time before you can use the user due to automatic file

recovery.

Precautions on the NETSERVER switch

When the NETSERVER switch (page 13) is turned off, you cannot use the following Remote Home Access

functions:



VAIO Picture Lab



Media Link



Data Sync (receiving) from other Home Servers and personal computers.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 103 104

No comments

Sony VGF-HS1 User Manual Page 17