Sony DAV-DZ100 User Manual Page 69

  • Download
  • Add to my manuals
  • Print
  • Page
    / 88
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 68
Settings and Adjustments
69
GB
To adjust the volume of all the
speakers at one time
Use the VOLUME control on the system, or
press VOLUME +/– on the remote.
x [TEST TONE]
The speakers will emit a test tone to adjust
[LEVEL (FRONT)] and [LEVEL
(SURROUND)].
Adjusting the speaker level by
using the test tone
1 Press DISPLAY when the system is
in stop mode.
The Control Menu appears.
2 Press X/x to select [SETUP],
then press ENTER.
The options for [SETUP] appear.
3 Press X/x to select [CUSTOM], then
press ENTER.
The Setup Display appears.
4 Press X/x repeatedly to select
[SPEAKER SETUP], then press ENTER
or c.
5 Press X/x repeatedly to select [TEST
TONE], then press ENTER or c.
6 Press X/x repeatedly to select [ON],
then press ENTER.
You will hear the test tone from each
speaker in sequence.
7 From your listening position, adjust the
value of [LEVEL (FRONT)] or [LEVEL
(SURROUND)] using C/X/x/c.
The test tone is emitted from only the
speaker which you are adjusting.
8 Press ENTER when you have finished
making adjustments.
9 Press X/x repeatedly to select [TEST
TONE], then press ENTER.
10Press X/x repeatedly to select [OFF],
then press ENTER.
• When you adjust the speaker settings, the sound cuts
off for a moment.
[L]
0 dB
Set this between –6 dB and +6 dB in
1 dB increments.
[R]
0 dB
Set this between –6 dB and +6 dB in
1 dB increments.
[OFF]
The test tone is not emitted from the
speakers.
[ON]
The test tone is emitted from each speaker
in sequence while adjusting level. When
you select one of the [SPEAKER SETUP]
items, the test tone is emitted from each
speaker in sequence.
Note
Page view 68
1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 87 88

Comments to this Manuals

No comments