Sony TC-WE625 User Manual download pdf (Page 11)

Advanced Recording Operations

Adjusting Bias and Recording

Level Calibration

Automatically

Since there are many different types of cassettes on the

market, your tape deck automatically sets the

appropriate equalization characteristics and bias

current for each tape type (ATS: Automatic Tape

Selection). However, you can get better recording

results by doing the automatic bias current and the

recording level calibration.

4 Press PAUSE P to start the automatic calibration

procedure.

The automatic calibration procedure starts (i.e.,

recording test tones, rewinding, and playing

back).

During the calibration, the counter changes from

9 to 0.

Advanced Recording Operations

Insert the cassette you want to record on into

either deck.

Make sure the record-protect tabs on the cassette

have not been removed.

2 Press DECK A or DECK B until “CAL” appears in

the display.

3 Press · or ª to select the side of the tape to be

recorded.

When the automatic calibration procedure ends,

the tape rewinds to the original position, the

counter returns to normal and the tape deck stops.

5 Start the actual recording (see page 6).

To cancel the automatic calibration function

Press p on the deck you’re using.

If “A” or “B” flashes continuously

The automatic calibration procedure has been interrupted

by:

— The end of the tape. Reverse the tape direction or rewind

the tape to a new position that allows recording of the

test tone.

— Damaged tape or dirty heads. Change the cassette or

clean and demagnetize the heads (see page 19).

Updating the calibration setting

If you insert a cassette and “[A] CAL” or “CAL [B]”

appears in the display, it means that automatic

calibration data in that deck for that tape type (I, II or

IV) exists. However, we recommend that you repeat

the automatic calibration procedure each time you

insert a new cassette since cassettes of the same type

also vary in their characteristics.

Before recalibrating, be sure to turn off “[A] CAL” or

“CAL [B]” by pressing DECK A or DECK B. Then start

from Step 2 of the automatic calibration procedure.

Press

The front side ·

The reverse side ª

To select

 CA. L9

CAL B REC 

DECK A / DECK B

PAUSE P

ª / ·

PAUSE P

ª / ·

PRr

ª·

)

PAUSE

CLEAR BACK FRONT

REC MUTE

REC

PAUSE

REC MUTE

REC

ON FILTERONOFF

(AMS) (AMS)

)

(AMS) (AMS)

p ª·

– RMS +

RMS/START

MEMORY

RESET

MEMORYAB

COUNTER

SET CHECK DISPLAY DECK A DECK B A+B REC HIGH/NORMAL

DOLBY NR

RMS AUTO CAL(STARTP)

DUBBING A B

START(DECK BP)

PITCH CONTROL

+–

ØON øOFF

RELAY

DIRECTION MODE

AUTO REC LEVEL

FADER ARL

π SYNCHRO

PHONES



RESET

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

Comments to this Manuals

No comments

Sony TC-WE625 User Manual Page 11

Comments to this Manuals

Related products and manuals for Cassette players Sony TC-WE625