Sony TC-WE475 User Manual Page 7

  • Download
  • Add to my manuals
  • Print
  • Page
    / 24
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 6
7
Възпроизвеждане на касета
1 Включете усилвателя и изберете позицията
на касетния дек.
2 Натиснете бутона POWER, след това
натиснете
докрай, за да отворите
отделението за касетата и поставете касета.
Възпроизвеждане на касета
7
Playing a Tape
Playing a Tape
Playing a tape
1 Turn on the amplifier and select the
tape deck position.
2 Press POWER, and press A fully to
open the cassette holder, then load a
cassette.
3 Set DIRECTION MODE.
To play back Set to
One side only g
Both sides continuously
1)
s
Both decks in succession
1)
RELAY
1)
The deck automatically stops after playing back
five times.
4 Press H.
The deck starts playing. Adjust the volume
on the amplifier.
Do not press POWER or A while the
tape deck is operating. If you do so,
the tape may be damaged.
To Press
With the side you
want to play
facing you
Stop playing x
Start playback from the
reverse side
h
Pause X PAUSE. Press the button
again to resume play.
Fast-forward or rewind M or m when the deck
is stopped
Take out the cassette A after stopping playing
Tips
Push in PITCH CONTROL to activate the Pitch
Control function and turn the control clockwise to
raise the pitch or counterclockwise to lower it.
You can adjust the pitch during playback on deck A
or normal-speed dubbing (but not during RMS
play
2)
or RMS dubbing
2)
).
2)
TC-WE675 only
To play a tape recorded with the Dolby
3)
NR, set
DOLBY NR to ON (TC-WE675 only) and select
the same position that the tape was recorded in—B
or C.
3)
“Dolby”, “HX Pro”, and the double-D symbol are
trademarks of Dolby Laboratories.
Със страната,
която искате да
възпроизведете към вас
3 Задайте DIRECTION MODE.
7
Playing a Tape
Playing a Tape
Playing a tape
1 Turn on the amplifier and select the
tape deck position.
2 Press POWER, and press A fully to
open the cassette holder, then load a
cassette.
3 Set DIRECTION MODE.
To play back Set to
One side only g
Both sides continuously
1)
s
Both decks in succession
1)
RELAY
1)
The deck automatically stops after playing back
five times.
4 Press H.
The deck starts playing. Adjust the volume
on the amplifier.
Do not press POWER or A while the
tape deck is operating. If you do so,
the tape may be damaged.
To Press
With the side you
want to play
facing you
Stop playing x
Start playback from the
reverse side
h
Pause X PAUSE. Press the button
again to resume play.
Fast-forward or rewind M or m when the deck
is stopped
Take out the cassette A after stopping playing
Tips
Push in PITCH CONTROL to activate the Pitch
Control function and turn the control clockwise to
raise the pitch or counterclockwise to lower it.
You can adjust the pitch during playback on deck A
or normal-speed dubbing (but not during RMS
play
2)
or RMS dubbing
2)
).
2)
TC-WE675 only
To play a tape recorded with the Dolby
3)
NR, set
DOLBY NR to ON (TC-WE675 only) and select
the same position that the tape was recorded in—B
or C.
3)
“Dolby”, “HX Pro”, and the double-D symbol are
trademarks of Dolby Laboratories.
За да възпроизведете Задайте на
Касетите в двете отделения
последователно
1)
Само едната страна
Двете страни
продължително
1)
1)
Декът спира автоматично, след като
възпроизведе пет пъти касетата.
4 Натиснете .
Декът започва възпроизвеждане. Настройте силата
на звука на усилвателя.
Не натискайте POWER или , докато
касетният дек работи. Ако го направите, е
възможно касетата да бъде повредена.
7
Playing a Tape
Playing a Tape
Playing a tape
1
Turn on the amplifier and select the
tape deck position.
2
Press POWER, and press A fully to
open the cassette holder, then load a
cassette.
3
Set DIRECTION MODE.
To play back Set to
One side only g
Both sides continuously
1)
s
Both decks in succession
1)
RELAY
1)
The deck automatically stops after playing back
five times.
4
Press H.
The deck starts playing. Adjust the volume
on the amplifier.
Do not press POWER or A while the
tape deck is operating. If you do so,
the tape may be damaged.
To Press
With the side you
want to play
facing you
Stop playing x
Start playback from the
reverse side
h
Pause X PAUSE. Press the button
again to resume play.
Fast-forward or rewind M or m when the deck
is stopped
Take out the cassette A after stopping playing
Tips
Push in PITCH CONTROL to activate the Pitch
Control function and turn the control clockwise to
raise the pitch or counterclockwise to lower it.
You can adjust the pitch during playback on deck A
or normal-speed dubbing (but not during RMS
play
2)
or RMS dubbing
2)
).
2)
TC-WE675 only
To play a tape recorded with the Dolby
3)
NR, set
DOLBY NR to ON (TC-WE675 only) and select
the same position that the tape was recorded in—B
or C.
3)
“Dolby”, “HX Pro”, and the double-D symbol are
trademarks of Dolby Laboratories.
За да Натиснете
Спрете възпроизвеждане
Стартирате възпроизвеждане
от другата страна
Поставите на пауза
PAUSE. Натиснете този
бутон отново, за да възобновите
възпроизвеждането.
Превъртите бързо
напред или назад
или , когато декът
е спрян
Извадите касетата
след като спрете
възпроизвеждането
Съвети
Натиснете PITCH CONTROL, за да активирате
функцията Pitch Control и завъртете копчето по
посока на часовниковата стрелка, за да увеличите
силата на сигнала или обратно на часовниковата
стрелка, за да го намалите.
Можете да регулирате силата на сигнала по време
на възпроизвеждане на касета в отделение А или
при презапис с нормална скорост (но не и при RMS
възпроизвеждане
2)
или при RMS презапис
2)
)
2)
Само за TC-WE675
За да възпроизведете касета, записана с Dolby
3)
NR, задайте DOLBY NR в положение ON (Само за
TC-WE675) и изберете същата позиция, при която е
била записана касетата - В или С.
3)
“Dolby”, “HX Pro” и символът двойно D са
търговски марки на Dolby Laboratories.
Възпроизвеждане на касета
Page view 6
1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

Comments to this Manuals

No comments