Sony TC-TX373 User Manual

Operating InstructionsStereo CassetteDeck3-867-730-11(1)©1999 by Sony CorporationTC-TX373

10Recording a CD— CD Synchro RecordingThe CD SYNC button lets you record from a CDto a tape easily. You can use TYPE I (normal) orTYPE II (CrO2) tape

11The remote supplied with theDHC-MD3331TAPEx1 Press `/1 (power) on theDHC-MD373/333 to turn on theDHC-MD373/333 component system.The tape deck turns

12The remote supplied with theDHC-MD33313TAPExTAPEX1 Press `/1 (power) on theDHC-MD373/333 to turn on theDHC-MD373/333 component system.The tape deck

135 Press zREC on the tape deck.The tape deck stands by for recording. Theindicators on the zREC, H (for the topside) and S buttons light up.If you w

14To save a tape permanentlyTo prevent a tape from being accidentally recordedover, break off the cassette tab from side A or B asillustrated.Tab of s

15TroubleshootingIf you run into any problem using this tape deck,use the following checklist.First, check that the mains lead is connectedfirmly and

Sony Corporation Printed in ChinaSpecificationsRecording system 4-track 2-channel stereoFrequency response (DOLBY NR OFF)50 – 14,000 Hz ( ±3 dB),

2This system is equipped with theDolby* B-type noise reductionsystem.* Dolby noise reduction manufactured under licensefrom Dolby Laboratories Licensi

3The TC-TX373 tape deck isdesigned only for the DHC-MD373/333 component systemHere are some of the features you can use withthis tape deck when connec

4Getting StartedHooking up the systemComplete steps 1 to 3, 5 to 7 below to hook up your system (DHC-MD373) using the suppliedcords.Complete steps 4 t

5Connection to the DHC-MD3731 (DHC-MD373 only)Firmly connect the AU BUS connectingcable to the system cable adapter.BATC-TX373Adapter2 (DHC-MD373 only

65 Connect A to A, and B to B usingthe audio connecting cords. Insert theplugs into jacks of the same colour.The two audio connecting cords are thesam

7How to insert the plugsInsert the plugs firmly into the jacks.Not firmly insertedInsert to here.6 For models with a voltage selector, setVOLTAGE SELE

8The remote supplied with theDHC-MD333FUNCTION1TAPExTAPEXVOLUMETAPEh/HTAPEm/M1 Press `/1 (power) on theDHC-MD373/333 to turn on theDHC-MD373/333 compo

9Remove the cassette Press A on the tape deck.Adjust the volume Turn VOLUME (or pressVOLUME +/– on the remote).Other operationsWhen using the DHC-MD37