Sony SLV-SE830G Operations Instructions download pdf (Page 42)

Recording TV programmes using the Dial Timer (SLV-SE830G only)

To return to the previous step

To return to the previous step, press the PROGRAM + and – buttons on the

VCR at the same time during any of the Dial Timer settings.

To stop recording

To stop the VCR while recording, press x (stop).

To use the VCR after setting the timer

To use the VCR before a recording begins, just press ?/1. The indicator

turns off and the VCR switches on. Remember to press ?/1 to reset the VCR

to recording standby after using the VCR.

You can also do the following tasks while the VCR is recording:

• Reset the counter (page 34).

• Display tape information on the TV screen (page 37).

• Check the timer settings (page 55).

• Watch another TV programme (page 37).

Press DIAL TIMER.

The programme position or LINE input appears in the display

window.

Turn DIAL TIMER to set the programme position.

To record from other equipment connected to one or more of the

LINE inputs, turn DIAL TIMER or press INPUT SELECT to

display the connected line in the display window.

Press DIAL TIMER to complete the setting.

“OK” appears in the display window for about five seconds.

The indicator appears in the display window and the VCR stands

by for recording.

To record from other equipment, leave the connected equipment

switched on.

DIAL TIMER

INPUT SELECT

DIAL TIMER

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 75 76

No comments

Sony SLV-SE830G Operations Instructions Page 42