Sony HVR-M15N User Manual download pdf (Page 10)

10 Chapter 1 Overview

Chapter 1 Overview

........................................................................................................................................................................................................

1) “EE” stands for “Electric to Electric.” In EE mode, the video and audio signals input to the VCR’s recording circuitry do

not pass through any magnetic conversion circuits but output via electric circuits only. This mode is used to check the input

signals and adjust input levels. The pictures output in EE mode are referred to as EE pictures.

1 Tape transport control section

1 Tape transport indicators

2 REC (record) button

When you press and hold this button then press PLAY

button, the each indicator lights and recording starts. If

you press this button while the tape is stopped, you can

check EE picture and audio signals for a moment.

When HDV/DV is selected, if [HDV/DV IN TC] in

[TC/UB SET] menu is set to [EXTERNAL], you can

also check EE time code signals. Press STOP button to

end the check.

For details, see “EE/PB SEL” in “IN/OUT REC” menu on

page 48.

For details of the time code, see “TC/UB SET” on page 52.

Notes

• The unit does not have an LP recording mode of the

consumer DV format. Only recording in SP mode is

available.

• To set the unit to recording pause mode with the

remote control unit DSRM-10 (not supplied), press

PAUSE button while holding down PLAY button to

set the unit to the playback pause mode, then press

REC button on the DSRM-10.

• When the recording mode is displayed in HDV, it

may take a few seconds to start recording. During this

time, REC indicator blinks.

3 PAUSE button

Press this button to set the unit to pause mode while

recording or playing. Press this button again to resume

the operation.

4 FF (fast forward) button

When you press this button, the indicator lights and the

tape is fast forwarded. During fast forward, the picture

does not appear on the monitor (you can see the picture

as it is seen in EE mode

during fast forward). To

locate a scene while monitoring the picture, keep

pressing this button during fast forward, playback or in

playback pause mode (picture search).

Notes

• If you set [EE/PB SEL] in [IN/OUT REC] menu to

[PB], EE picture and EE audio signals are not output.

• If you set [FF/REW SPEED] in [VTR SET] menu to

[SHUTTLEMAX], the picture is played back during

fast forward.

For details on running speed with [SHUTTLEMAX], see

“FF/REW SPEED” in “VTR SET” menu on page 51.

1 Tape transport indicators

2 REC (record) button

3 PAUSE button

4 FF (fast forward) button

5 PLAY button

6 REW (rewind) button

7 STOP button

Location and Function of Parts

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 79 80

Comments to this Manuals

No comments

Sony HVR-M15N User Manual Page 10

Comments to this Manuals

Related products and manuals for Cassette players Sony HVR-M15N

Prodotti e manuali riguardandi no Acer CB241HQK