Sony TC-WR681 User Manual download pdf (Page 11)

Advanced Recording Operations

TC-WE525/WE425/WR681/3-862-714-11(1)/U/AU/CEK/CN1/CN4

§§

PRr

ª·

)

pª·

+–

DIRECTION MODE SYNCHRO

ª / ·

Synchro-Recording With a CD

Player Through a Monaural (2P)

Mini-plug Cord (TC-WE525/

WE425 only)

By pressing SYNCHRO, you can perform synchro-

recording on your tape deck with a Sony CD player

connected to the CONTROL A1 connector through an

optional monaural (2P) mini-plug cord (connecting

cord for CONTROL A1) (see page 4). The monaural

(2P) mini-plug cord supports advanced functions not

possible with the commander-based CD synchro-

recording function on previous models. Further

information on the various operations made possible

by a monaural (2P) mini-plug cord is provided in the

pamphlet attached to this manual.

1 Set the source selector on the amplifier to CD

player.

2 Insert a CD into the CD player.

3 Select the play mode (CONTINUE, SHUFFLE, or

PROGRAM) of the CD player.

4 Insert a cassette into deck B.

5 Select the side(s) to be recorded on.

6 Press SYNCHRO.

7 Select the side you want to start recording from

on deck B.

To record from Press

The front side ·

The reverse side ª

AOnly one side

Both sides

To record on Set DIRECTION MODE to

a or RELAY

If your CD player has the Peak Search function:

The SYNCHRO button indicator lights up and the CD

player locates the highest signal level among the tracks

to be recorded as the tape deck adjusts the recording

level. When the recording level adjustment is

completed, CD Synchro-Recording starts automatically.

If your CD player does not have the Peak Search

function:

The CD player changes to play pause and deck B to

recording pause. Press PAUSE P on deck B to start

Synchro-Recording. Adjust the recording level

automatically (see page 8) before pressing SYNCHRO.

To stop CD Synchro-Recording

Press p on deck B or the CD player.

z You can use an optional remote to operate the CD

player

To start CD play, press P twice; to pause CD play, press

P once; to locate a CD track, press = or +.

z If the SYNCHRO button indicator goes off after

flashing three times

The tape cannot be recorded on because the record-

protect tab(s) on the selected side(s) of the cassette has

(have) been removed.

z Length of tape used for recording

Tracks on a CD differ in length. Classical music CDs

and others often have tracks that exceed the recording

time of a single cassette side. In this case, record the

tape manually.

z When recording from the middle of the tape

A tape that is inserted and has not been played or

recorded on is assumed by the deck to be a new tape,

even if the present location is in the middle of the tape.

The deck will transport the tape for 10 seconds before

starting CD Synchro-Recording to bypass the portion

corresponding with the leader. To begin CD Synchro-

Recording without the ten-seconds delay, play or record

on the tape for a few seconds before starting the CD

Synchro-Recording procedure.

(Continued)

4/08-12_TC-WE525.11(1)EN 8/19/98, 5:32 PM11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Comments to this Manuals

No comments

Sony TC-WR681 User Manual Page 11

Comments to this Manuals

Related products and manuals for Cassette Decks Sony TC-WR681