Sony SDM-HS93 User Manual download pdf (Page 15)

Technical Features

Power saving function

This monitor meets the power-saving guidelines set by VESA,

ENERGY STAR, and NUTEK. If the monitor is connected to a

computer or video graphics board that is DPMS (Display Power

Management Signaling) compliant, the monitor will automatically

reduce power consumption as shown below.

SDM-HS53

SDM-HS73

SDM-HS93

* When your computer enters the “active off” mode, the input signal is

cut and NO INPUT SIGNAL appears on the screen. After 5 seconds,

the monitor enters the power saving mode.

** “deep sleep” is the power saving mode defined by the Environmental

Protection Agency.

Reducing the power consumption

( mode)

If you set the mode to LOW by pressing the button on

the front of the monitor, the backlight level is reduced and the

power consumption is reduced, too.

Press the button several times until LOW appears.

LOW appears on the screen and the backlight level is reduced.

LOW automatically disappears after about 5 seconds.

Automatic picture quality

adjustment function

When the monitor receives an input signal, it automatically

matches the signal to one of the factory preset modes stored in the

monitor’s memory to provide a high quality picture at the center

of the screen.

For input signals that do not match one of the factory preset

modes, the automatic picture quality adjustment function of this

monitor automatically adjusts the picture position, phase, and

pitch, and ensures that a clear picture appears on the screen for

any timing within the monitor’s frequency range (horizontal: 28 –

61 kHz (SDM-HS53), 28 – 80 kHz (SDM-HS73/HS93), vertical:

48 – 75 Hz).

Consequently, the first time the monitor receives input signals

that do not match one of the factory preset modes, the monitor

may take a longer time than normal for displaying the picture on

the screen. This adjustment data is automatically stored in

memory so that next time, the monitor will function in the same

way as when the monitor receives the signals that match one of

the factory preset modes.

In all modes as above, if the picture is adjusted, the adjustment

data is stored as a user mode and automatically recalled whenever

the same input signal is received.

Note

While the automatic picture quality adjustment function is activated, only

the 1 (power) switch will operate.

Power mode Power consumption 1 (power)

indicator

normal

operation

25 W (max.) green

active off*

(deep sleep)**

1 W (max.) orange

power off 1 W (max.) off

Power mode Power consumption

1 (power)

indicator

normal

operation

45 W (max.) green

active off*

(deep sleep)**

1 W (max.) orange

power off 1 W (max.) off

Power mode Power consumption

1 (power)

indicator

normal

operation

50 W (max.) green

active off*

(deep sleep)**

1 W (max.) orange

power off 1 W (max.) off

LOW

1 2 ... 10 11 12 13 14 15 16 17 18 19

Comments to this Manuals

No comments

Sony SDM-HS93 User Manual Page 15

Comments to this Manuals

Related products and manuals for Car Video Sony SDM-HS93