Sony Xplod CDX-MP80 User Manual download pdf (Page 33)

33

Error displays/Messages

*1 When the CD/MD changer is connected to the unit,

the disc number of the CD or MD appears in the

display.

*2 The disc number of the disc causing the error

appears in the display.

Radio reception

Preset tuning is not possible.

• Store the correct frequency in the memory.

• The broadcast signal is too weak.

The stations cannot be received.

The sound is hampered by noises.

• Connect a power aerial control lead (blue) or

accessory power supply lead (red) to the

power supply lead of a car’s aerial booster.

(Only when your car has built-in FM/MW/

LW aerial in the rear/side glass.)

• Check the connection of the car aerial.

• The auto aerial will not go up.

t Check the connection of the power aerial

control lead.

• Check the frequency.

• When the DSO mode is on, the sound is

sometimes hampered by noises.

t Set the DSO mode to off (page 25).

Automatic tuning is not possible.

• The local seek mode is set to “on.”

t Set the local seek mode to “off” (page

24).

• The broadcast signal is too weak.

t Perform manual tuning.

The “ST” indication flashes.

• Tune in the frequency accurately.

• The broadcast signal is too weak.

t Set to the monaural reception mode (page

24).

A programme broadcast in stereo is heard

in monaural.

The unit is in monaural reception mode.

tCancel monaural reception mode (page

24).

RDS

Seek starts after a few seconds of listening.

The station is non-TP or has weak signal.

tPress (AF) or (TA) repeatedly until “AF

off” or “TA off” appears.

No traffic announcements.

• Activate “TA.”

• The station does not broadcast any traffic

announcements despite being TP.

t Tune in another station.

PTY displays “--------.”

• The current station is not an RDS station.

• RDS data has not been received.

• The station does not specify the programme

type.

Error displays

(For this unit and optional CD/MD changers)

The following indications will flash for about

5 seconds, and an alarm sound will be heard.

Blank*

1

No tracks have been recorded on an MD.*

2

t Play an MD with recorded tracks on it.

Error*

1

• A CD is dirty or inserted upside down.*

2

tClean or insert the CD correctly.

• A CD/MD cannot play because of some

problem.*

2

tInsert another CD/MD.

High Temp

The ambient temperature is more than 50°C.

t Wait until the temperature goes down

below 50°C.

NO Disc

No disc is inserted in the CD/MD unit.

t Insert discs in the CD/MD unit.

NO Mag

The disc magazine is not inserted in the CD/

MD unit.

t Insert the magazine in the CD/MD unit.

NO Music*

1

A CD which is not a music file is inserted.

t Insert a music CD.

Not Ready

The lid of the MD unit (MDX-40) is open or

the MDs are not inserted properly.

t Close the lid or insert the MDs properly.

Push Reset

The CD/MD unit cannot be operated because

of some problem.

t Press the RESET button on the unit.

continue to next page t

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 67 68

Comments to this Manuals

No comments