Sony SVR-2000 User Manual download pdf (Page 53)

Programming Your Remote Control

filename[04 setu

fm] model name1[PTV Receiver]

Setting Up Your

System

Learning Mode Method

The Remote Control has the ability to “learn” codes from your TV (and/or audio

system) remote. This method works for every remote controlled TV (or stereo).

Put the Remote Control in learning mode.

a) Press the TiVo button and TV POWER simultaneously for 3 seconds until the

LED on the Remote Control remains lit continuously.

b) Using the number keys on the Remote Control, enter the code 0975. The Remote

Control LED flashes three times. You have 30 seconds to complete the next step.

Position the two remotes.

Position the TV remote and the Remote Control head-to-head about two inches

apart with their IR emitters facing each other. (The Remote Control’s IR emitter

is at the end that you point at the TV.)

Send the signal to the Remote Control.

a) Press the button on the Remote Control that you want to teach. For example, TV

POWER or MUTING. The Remote Control LED will flash rapidly to indicate

that it is ready to be taught. You have 4 seconds to do the next step.

b) Press the equivalent button on the TV remote. For example, if you pressed TV

POWER on the Remote Control, press the power button on the TV remote.

c) Press and hold the equivalent button on the TV remote until the Remote

Control’s LED flashes three times to indicate that it has learned the code, or

repeat this step until the LED does flash three times.

d) This step can be repeated as many times as needed.

Exit learning mode and test the code.

a) Press the CLEAR button on the Remote Control to exit learning mode.

b) Point the Remote Control at the TV and press the button you just taught. For

example, if you’ve just taught the TV POWER button, it should turn on the TV.

Note

• You can program the following keys with

the Learning Remote method:

TV POWER, VOL (volume) +/–, and

MUTING.

• Do not attempt this method if there is

bright fluorescent lighting or other IR

interference.

• Unlike code entry and code search, you

need to program each button individually

in learning mode.

• If you have a stereo system connected to

the SVR Recorder, you can program the

POWER button on the Remote Control to

turn on/off your stereo. To do so, use

code 1975 instead of 0975 in step 1. You

can program the POWER button to turn

on/off both your TV and your stereo.

• To reset the Remote Control back to the

manufacturer’s settings, press and hold

the TiVo and TV POWER buttons together

for three seconds until the LED on the

Remote Control remains lit. Enter code

0981 (or 1981) using the number keys on

the Remote Control.

01_COV.book Page 53 Sunday, May 26, 2002 11:46 AM

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 67 68

Comments to this Manuals

No comments

Sony SVR-2000 User Manual Page 53

Comments to this Manuals

Related products and manuals for Car DVR Sony SVR-2000