Sony HDR-SR1E User Manual download pdf (Page 106)

106

Warning indicators and messages (Continued)

Recovering data

• Your camcorder tries to recover data

automatically if the data writing was

not performed properly.

Cannot recover data.

• Writing data onto the hard disk of the

camcorder has failed. Attempts were

made to recover the data, but they were

unsuccessful.

x “Memory Stick Duo”

Reinsert the Memory Stick.

• Reinsert the “Memory Stick Duo” a

few times. If even then the indicator

flashes, the “Memory Stick Duo” could

be damaged. Try with another

“Memory Stick Duo.”

This is a read-only Memory Stick.

• Insert a writable “Memory Stick Duo.”

Incompatible type of Memory

Stick.

• A type of “Memory Stick Duo”

incompatible with your camcorder is

inserted (p. 112).

This Memory Stick is not

formatted correctly.

• Check the format, then format the

“Memory Stick Duo” with your

camcorder if necessary (p. 62, 112).

Cannot record. The Memory Stick is

full.

• Delete unnecessary images (p. 52).

Cannot record still pictures. (p. 93)

- The Memory Stick is locked.

Check the tab. (p. 112)

Memory Stick has been removed.

Process canceled.

Memory Stick folders are full.

• You cannot create folders exceeding

999MSDCF. You cannot create or

delete created folders using your

camcorder.

• Format the “Memory Stick Duo”

(p. 62), or delete them using your

computer.

Do not eject the Memory Stick during

writing.

Cannot save still picture.

• When using the Dual Rec function, do

not remove the still image recording

media from the camcorder until

recording is finished and still image

recording is complete (p. 37).

No more still pictures during movie

recording.

• You are trying to record more than 3

still images, the maximum number that

can be recorded at one time of

recording, on a “Memory Stick Duo”

with the Dual Rec function(p. 37).

x PictBridge compliant printer

Check the connected device.

• Turn off the printer and on again, then

remove the USB cable (supplied) and

reconnect it.

Not connected to PictBridge

compatible printer.

• Turn off the printer and on again, then

remove the USB cable (supplied) and

reconnect it.

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 134 135

Comments to this Manuals

No comments