GB
23
Recording/Playback
turn the power off. The POWER/CHG (charge) lamp flashes while the
settings are being stored.
To continue recording on the memory cards, one
after another (Relay recording)
Insert memory cards each in both slots A and B, so the camcorder
switches memory card A (or B) just before space on the other one
runs out, and continues recording on the next memory card
automatically.
Do the following setting before recording.
Press the MENU button select (REC/OUT SET) [REC SET]
[SIMUL/RELAY REC] [RELAY REC] with the ////SET button.
• Do not eject the memory card that is currently being used for recording.
When replacing a memory card while recording, replace only the one in
the slot whose access lamp is off.
• Even if you press the SLOT SELECT button, while recording movies, you
cannot switch the slot currently being used.
• When the remaining recording time of the memory card being used is
less than 1 minute and the other slot has recordable memory card
inserted, [ ] or [ ] appears on the camcorder screen.
The indicator turns off when the memory card is switched.
• If you start recording on a memory card with the remaining recording
time of less than 1 minute, the camcorder may not be able to relay-
record. To perform relay recording without fail, make sure that the
capacity of the memory card is more than 1 minute when you start
recording.
• Seamless playback of relay-recorded movies with this camcorder is not
possible.
Notes
Insert a recordable memory card.
Start
Small space
End
REC: Recording
Small space
Comments to this Manuals