Sony CCD-TRV615 User Manual download pdf (Page 8)

Installing and charging the battery pack

Charging the battiiy pack

Charge the battery pack on a flat surface without vibration. The battery pack is charged

a little in the factory.

(1) Open the DC IN jack cover and connect the supplied AC power adaptor to the

DC IN jack with the plug's A mark up.

(2) Connect the power cord to the AC power adaptor.

(3) Connect the power cord to a wall outlet.

(4) Slide the POWER switch to OFF. Remaining battery time is indicated by the

minutes on the display window. Charging begins.

When the remaining battery indicator becomes normal charge is completed. For

full charge, which allows you to use the battery longer than usual, leave the battery

pack attached for about 1 hour after normal charge is completed and until FULL

appears on the display window. Unplug the AC power adaptor from the camcorder.

You can also use the battery pack before it is completely charged.

Before using the camcorder with the battery pack, unplug the AC ¡x)wer adaptor from

the DC IN jack of the camcorder.

POWER

■ ICAMERAI

11^15

■ OFF

■ ■an»

Note

------

min" appears in the display window until the camcorder calculates remaining

battery time.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 88 89

No comments

Sony CCD-TRV615 User Manual Page 8