Sony DSC-P2 Operations Instructions download pdf (Page 83)

filename[C:\My Documents\_upload job\3075509111\3075509111DSCP2UC\02GB-DSCP2UC\13TRB.FM]

masterpage:L1adv-Right-04

model name1[DSC-P2]

[3-075-509-11(1)]

Troubleshooting

“Memory Stick”

Others

Symptom Cause Solution

You cannot insert a

“Memory Stick.”

• You are inserting it backwards. p Insert it from the right side (page 17).

You cannot record on a

“Memory Stick.”

• The write-protect switch on the “Memory Stick”

is set to the LOCK position.

• The “Memory Stick” is full.

p Set it to the recording position (page 95).

p Delete unnecessary images (pages 34, 71).

You cannot format a

“Memory Stick.”

• The write-protect switch on the “Memory Stick”

is set to the LOCK position.

p Set it to the recording position (page 95).

You have formatted a

“Memory Stick” by

mistake.

• All the images on the “Memory Stick” are

deleted by formatting.

p We recommend that you set the “Memory Stick” write-protect

switch to the LOCK position to protect accidental erasure

(page 95).

Symptom Cause Solution

The camera does not

work, no operations can

be performed.

• An “InfoLITHIUM” battery is not used.

• The battery level is low or zero (The

indicator appears.).

• The AC power adaptor is not connected

securely.

• The internal system is not working properly.

p Use an “InfoLITHIUM” battery only (page 95).

p Charge the battery (page 10).

p Connect it securely to the DC IN jack of your camera and to a

wall outlet (wall socket) (page 13).

p Disconnect, and then, after one minute, reconnect all power

sources. Then turn the power on and check that the camera

works properly.

The power is on, but the

camera does not work.

• The internal system is not working properly. p Remove, and then, after one minute, reinstall the battery. If this

does not work, press the RESET button located inside the

battery/“Memory Stick” cover with a pointed object, then turn

the power on again. (This will clear the date/time settings, etc.)

You cannot identify the

indicator on the LCD

screen.

— p Check the indicator (pages 98 to 100).

The lens does not move

back when you turn off the

camera.

• The battery pack is discharged. pReplace it with a fully charged battery or use the AC power

adaptor (pages 10, 13).

01cov.book Page 83 Wednesday, April 3, 2002 11:17 AM

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 103 104

Comments to this Manuals

No comments

Sony DSC-P2 Operations Instructions Page 83

Comments to this Manuals

Related products and manuals for Bridge cameras Sony DSC-P2