Sony Cyber-shot DSC-T70 User Manual download pdf (Page 52)

Shooting menu For details on the operation 1 page 41

The flash strobes two or more times before

shooting to reduce the red-eye phenomenon when

using the flash.

• Because it takes about a second until the shutter clicks, hold the camera firmly to prevent the effects of

vibration. Also, do not let the subject move.

• Red-eye reduction may not produce the desired effects depending on individual differences, the distance

to the subject, if the subject does not see the pre-strobe, or other conditions. In such a case, you can correct

the red-eye phenomenon using [Retouch] in the viewing menu after shooting (page 58).

• If you do not use the Face Detect function, Red Eye Reduction does not work, even when you select [Auto].

• This setting is not available depending on the Scene Selection mode (page 45).

Selects whether to use the Face Detect function continuously or when the touch panel is

touched.

Red Eye Reduction: Reducing the red-eye phenomenon

(Auto)

When the Face Detect function is activated, the flash strobes

automatically to reduce the red-eye phenomenon.

(On)

The flash always strobes to reduce the red-eye phenomenon.

(Off)

Does not use Red Eye Reduction.

Face Detection: Detecting the face of subject

(Continuous)

Detecting the faces of your subject will also adjust focus,

strobe, exposure, white balance, and pre-strobe for red-eye

reduction.

Touching the face changes the Face Detection frame to the

Face Priority frame.

If the subject area you touch is not a face, the section near the

touched area is brought into focus.

(When touched)

Touch the screen, and if a face is detected, operation is the

same as [Continuous].

Face Detection frame

Face Detection mark

Face Priority frame

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 130 131

No comments

Sony Cyber-shot DSC-T70 User Manual Page 52