Sony BDP-S1000ES User Manual download pdf (Page 53)

53

Settings and Adjustments

Audio Settings

The default settings are underlined.

Selects the jack type to output audio signals.

2-channel Linear PCM signals are output at

48 kHz maximum from output jacks other

than the priority jacks.

To obtain the best possible surround sound,

set the speakers you have connected and their

distance from your listening position.

Then use the test tone to adjust the volume

and the balance of the speakers to the same

level.

This setting is selectable when “Audio

Output Priority” is set to “Multi Channel

Analog.”

To set the speakers

1 Select “Speaker Settings” in “Audio

Settings,” and press ENTER.

2 Select “Size” or “Distance,” and press

ENTER.

3 Select a setup item using M/m, and press

ENTER.

4 Select or set a setting using M/m, and

press ENTER.

Size

Selects the size of the speakers.

•Front

•Center

• Surround

Audio Output Priority

HDMI Outputs audio signals from

the HDMI OUT jack.

Coaxial/

Optical

Outputs audio signals from

the DIGITAL OUT

(OPTICAL/COAXIAL)

jack.

Multi Channel

Analog

Select this when connecting

an AV amplifier (receiver)

via the MULTI CHANNEL

OUTPUT jacks.

Stereo Analog Outputs audio signals from

the LINE OUT (R-AUDIO-

L) jacks.

Headphones Outputs audio signals from

the headphone jack

(page 41).

Speaker Settings

Large Normally select this

position.

Small Select this when the

speakers cannot reproduce

adequate low frequencies.

Large

Normally select this

position.

Small Select this when the speaker

cannot reproduce adequate

low frequencies.

None Select this if you do not

connect a center speaker.

Large

Normally select this

position.

Small Select this when the

speakers cannot reproduce

adequate low frequencies.

None Select this if you do not

connect surround speakers.

,continued

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 94 95

Comments to this Manuals

No comments