Sony STR-DE898 User Manual download pdf (Page 18)

masterpage:Left

lename[D:\Sony

S

EM\Data_DE898_Revision3\J9050152_2580791113DE898U\2580791113\GB03CON_STR-

D

E898-U.fm]

18

GB

model name1[STR-DE898]

[2-580-791-11(3)]

You can use the SPEAKER SET UP menu to set

the size, distance and location of the speakers

connected to this receiver.

1 Press ?/1 to turn on the receiver.

2 Press MAIN MENU repeatedly to select

“SET UP”.

3 Press or repeatedly to select the

parameter you want to adjust.

For details, see “SPEAKER SET UP menu

parameters” below.

Note

Some speaker setup items may appear dimmed in

the display. This means that they have been

adjusted automatically due to other speaker

settings or may not be adjustable.

4 Turn –/+ to select the setting you want.

The setting is entered automatically.

Note

Press ENTER if you select the setting for “SP.

PATTERN X–X”.

5 Repeat steps 3 and 4 until you have set

all of the items that follow.

SPEAKER SET UP menu

parameters

The initial settings are underlined.

x EASY SET UP XXX (Speaker easy setup)

•YES

If you want to set up your speakers

automatically, select “YES”. You can select a

pre-defined speaker pattern (see the supplied

“Easy Setup Guide”).

•NO

If you want to adjust the settings of each

speaker manually, select “NO”.

x SP. PATTERN X–X

(Speaker setup pattern)

When you select “EASY SET UP YES”, select

the speaker setup pattern. Turn –/+ to select the

speaker setup pattern and press ENTER to enter

the selection. Check your speaker setup pattern

using the supplied “Easy Setup Guide”.

x SUB WOOFER XXX

(Sub woofer selection)

•YES

If you connect a sub woofer, select “YES”.

•NO

If you did not connect a sub woofer, select

“NO”. The front speakers are automatically

set to “LARGE” and you cannot change this

setting. This activates the bass redirection

circuitry and outputs the LFE signals from

other speakers.

• In order to take full advantage of the Dolby

Digital bass redirection circuitry, we

recommend that you set the cut off frequency

on the sub woofer as high as possible.

x FRONT SP XXXXX

(Front speakers size)

• LARGE

If you connect large speakers that will

effectively reproduce bass frequencies, select

“LARGE”. Normally, select “LARGE”.

•SMALL

If the sound is distorted, or you feel a lack of

surround effects when using multi channel

surround sound, select “SMALL” to activate

the bass redirection circuitry and output the

front channel bass frequencies from the sub

woofer. When the front speakers are set to

“SMALL”, the center, surround and surround

back speakers are also automatically set to

“SMALL” (unless previously set to “NO”).

5: Setting up the speakers

GB01COV_STR-DE898-U.book Page 18 Tuesday, March 15, 2005 12:20 PM

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 63 64

Comments to this Manuals

No comments