Sony STR-DV10 User Manual download pdf (Page 38)

masterpage:Left

lename[E:\SEM_Janet\Revision1_STR-

V10\J9050000_2560573121_US\2560573121\US06ADV_STR-DV10-U.fm]

model name1[STR-DV10]

[2-560-573-12(1)]

Using the CUSTOMIZE menu

to adjust the receiver

You can adjust various receiver settings using

the CUSTOMIZE menu.

1 Press MAIN MENU repeatedly to select

“ CUSTOM ”.

2 Press or repeatedly to select the

parameter you want to adjust.

For details, see “CUSTOMIZE menu

parameters” below.

3 Turn the –/+ jog dial to select the

setting you want.

The setting is entered automatically.

4 Repeat steps 2 and 3 to adjust the other

items.

CUSTOMIZE menu parameters

The initial settings are underlined.

x 96 XXXX

(DTS 96/24 decoding mode)

• AUTO

When a DTS 96/24 signal is input, it is played back

at 96 kHz sampling frequencies.

•OFF

Even when a DTS 96/24 signal is input, it is played

back at 48 kHz sampling frequencies.

Notes

• This parameter is valid only in the A.F.D. mode

(page 29). In other sound fields, this parameter is

always set to “96 OFF”.

• DTS 96/24 decoding is valid only in the A.F.D. mode

(page 29). When the system is set to other sound

fields, standard 48 kHz decoding is used.

• Even when a DTS 96/24 signal is input, standard

48 kHz decoding is used if any speakers are set to

“SMALL” or if the sub woofer is set to “NO”.

x SB XXXX

(Surround back decoding mode)

You can also press SURR BACK DECODING to set

the surround back decoding mode (page 33).

For details on each decoding mode, see page 34.

•OFF

• AUTO

•ON

Note

This parameter is valid only in the A.F.D. mode except

for Dolby Pro Logic IIx mode (page 29).

x A.V.SYNC. X

(Time alignment)

•Y (Yes)

The audio output is delayed so that the time gap

between the audio output and visual display is

minimized.

•N (No)

The audio output is not delayed.

Notes

• This parameter is useful when you use a large LCD

or plasma monitor or a projection TV.

• This parameter is not valid when MULTI CH IN

function is selected.

x DEC. XXXX

(Digital audio input decoding priority)

Lets you specify the input mode for the digital signal

input to the DIGITAL IN jacks.

The initial setting is “DEC. AUTO” for VIDEO 2, 3

and “DEC. PCM” for DVD, MD/TAPE and SA-CD/

CD.

• AUTO

Automatically switches the input mode between

DTS, Dolby Digital, or PCM.

•PCM

PCM signals are given priority (to prevent the

interruption when playback starts). Even when other

signals are input, the sound is output. However, this

receiver cannot decode DTS-CD when set to “DEC.

PCM”.

Note

When set to “DEC. AUTO” and the sound from the

digital audio jacks (for CD, etc.) is interrupted when

playback starts, set to “DEC. PCM”.

Advanced settings

DTS 96/24

US01COV_STR-DV10-U.book Page 38 Monday, July 4, 2005 11:52 AM

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 55 56

Comments to this Manuals

No comments

Sony STR-DV10 User Manual Page 38

Comments to this Manuals

Related products and manuals for Audio tuners Sony STR-DV10