Sony HT-DDW3000 User Manual download pdf (Page 47)

47

GB

Other Operations

\

Switching between

digital and analog audio

(INPUT MODE)

When you connect components to both digital

and analog audio input jacks on the receiver,

you can fix the audio input mode to either of

them, or switch from one to the other,

depending on the type of material you intend

to watch.

1 Turn INPUT SELECTOR on the

receiver to select the input.

You can also use the input buttons on the

remote.

2 Press INPUT MODE repeatedly

on the receiver to select the

audio input mode.

The selected audio input mode appears on

the display.

Audio input modes

x AUTO

Gives priority to digital audio signals when

there are both digital and analog connections.

If there are no digital audio signals, analog

audio signals are selected.

x ANALOG

Specifies the analog audio signals input to the

AUDIO IN (L/R) jacks.

Note

Some audio input modes may not be set up

depending on the input.

Naming inputs

You can enter a name of up to 8 characters for

inputs and display it on the receiver’s display.

This is convenient for labeling the jacks with

the names of the connected components.

1 Press the input button to select

the input you want to create an

index name for.

You can also use INPUT SELECTOR on

the receiver.

2 Press AMP MENU.

“1-LEVEL” appears on the display.

3 Press V/v repeatedly to select

“5-AUDIO”.

4 Press or b to enter the

menu.

5 Press V/v repeatedly to select

“NAME IN”.

6 Press or b to enter the

parameter.

The cursor flashes and you can select a

character. Follow the procedure given in

“To create an index name” (page 46).

Other Operations

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 59 60

Comments to this Manuals

No comments