Sony CMT-BX50BT User Manual download pdf (Page 28)

CMT-BX50BT.GB.3-293-640-11(1)

28

GB

To improve tuner reception

Turn o CD player power by using the

CD power management function. By

default, CD power is turned on.

1

Press CD



to select the CD

function, and then turn o the

system.

2

After “STANDBY” stops ashing, press

/



on the unit while holding

down 



on the unit.

“CD POWER OFF” appears. With CD

player power turned o, disc access

time is increased. To turn on CD

player power, repeat the procedure

until “CD POWER ON” appears.

To reset the system to factory settings

If the system still does not operate

properly, reset the system to factory

settings.

Use buttons on the unit to reset the

system to its factory default settings.

1

Disconnect and reconnect the power

cord, and then turn on the system.

2

Press 



, VOL +



and /



at

the same time.

All user-congured settings, such as

preset radio stations, timer, and the

clock, are deleted.

Messages

CD/MP3 player, Tuner

CD Over: You have reached the end of

the disc while pressing 



during

playback or pause.

Complete!: e preset operation ended

normally.

LOCKED: e disc tray does not open.

Contact your nearest Sony dealer.

No Disc: ere is no disc in the system,

or you have loaded a disc that cannot

be played.

No Step: All of the programmed tracks

or les have been erased.

Push SELECT!: You tried to set the clock

or timer during timer operation.

Push STOP!: You pressed PLAY MODE



during playback.

Reading: e system is reading

information of the disc. Some buttons

are not available.

SET CLOCK!: You tried to select the timer

when the clock is not set.

SET TIMER!: You tried to select the timer

when the Play Timer is not set.

Step Full!: You tried to program more

than 26 tracks or les (steps).

TIME NG!: e Play Timer start and end

times are set to the same time.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 34 35 36

Comments to this Manuals

No comments