Sony BDV-IT1000ES User Manual download pdf (Page 21)

Getting Started

3 Connect the speaker cords to the speaker.

The connector and color tube of the speaker cords are the same color as the label of the jacks to be

connected.

Use the speaker cords as follows:

• Front left speaker (L): White

• Front right speaker (R): Red

• Surround left speaker (L): Blue

• Surround right speaker (R): Gray

Be sure to match the speaker cords to the appropriate terminals on the speakers: the speaker cord

with the color tube to 3, and the speaker cord without the color tube to #. Do not catch the

speaker cord insulation in the speaker terminals.

Insert the speaker cords into the speaker terminal of the speaker as far as they will go. Ensure that

the cords are secure by gently pulling on them one at a time.

Note

• When assembling, take care not to touch the speaker units.

• When removing the speaker cords from the speaker terminals, pull out the speaker cords while pressing the

white button on the speaker terminal with a tool such as a flathead screwdriver.

Front speaker

Surround speaker

Connector

Color tube

Check the polarity on the label.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 154 155

No comments

Sony BDV-IT1000ES User Manual Page 21