Sony RDPT50iP User Manual

Browse online or download User Manual for Docking speakers Sony RDPT50iP. Sony RDPT50iP User's Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 2
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0

Should any solid object or liquid fall into the
unit, unplug the unit and have it checked by
qualified personnel before operating it any
further.

During a thunderstorm, do not touch the
antenna (aerial) and plug.

Do not touch the unit with wet hands.

Do not place the unit anywhere near water.
NOTES ON LITHIUM BATTERY

Wipe the battery with a dry cloth to assure a
good contact.

Be sure to observe the correct polarity when
installing the battery.

Do not hold the battery with metallic tweezers,
otherwise a short-circuit may occur.
Note

In the Operating Instructions, “iPod” is used as
a general reference to functions on an iPod,
iPhone or iPad, unless otherwise specified by
the text or illustrations.
If you have any questions or problems concerning
your unit, please consult your nearest Sony dealer.
Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
With 3 ohm loads both channels driven, from
150 Hz - 10,000 Hz; rated 3 watts per channel
minimum RMS power, with no more than 10%
total harmonic distortion in AC operation.
iPod
Rated voltage: DC 5 V
Rated current: Max. 2.1 A
General
Speaker
Approx. 50 mm (2 inches) dia. × 2
Input
AUDIO IN jack (ø 3.5 mm stereo minijack)
Input impedance: 10 kΩ
Standard input level: 245 mV
Power output
3 W + 3 W (at 10% harmonic distortion)
(with AC adaptor)
1 W + 1 W (at 10% harmonic distortion)
(with rechargeable battery)
Power source
Rated external power source: DC IN 6.5V (With
supplied AC adaptor (AC 100 V - 240 V,
50 Hz/60 Hz)) or Rechargeable battery pack:
NH-RDPT50
Battery life
Approx. 5 hours (Playback of iPod)
Dimensions (including projecting parts and
controls)
Approx. 337.0 mm × 108.5 mm × 77.0 mm
(w/h/d)
(13
3
/
8
inches × 4
3
/
8
inches × 3
1
/
8
inches)
(Docking Tray and Storage Stand closed)
Approx. 337.0 mm × 108.5 mm × 130.0 mm
(w/h/d)
(13
3
/
8
inches × 4
3
/
8
inches × 5
1
/
8
inches)
(Docking Tray and Storage Stand open)
Mass
Approx. 1.2 kg (2 lb 10 oz)
Supplied accessories
Remote control (with a lithium battery) (1)
AC adaptor (1)
Operating Instructions (this document) (1)
Cushion for small-size iPod (1)
Compatible iPod/iPhone/
iPad models
The compatible iPod/iPhone/iPad models are as
follows.
Update the software of the iPod/iPhone/iPad to
the latest version before using it with this unit.
iPod touch (4th generation)
iPod touch (3rd generation)
iPod touch (2nd generation)
iPod nano (6th generation)*
iPod nano (5th generation)
iPod nano (4th generation)
iPod nano (3rd generation)
iPod classic
iPhone 4S
iPhone 4
iPhone 3GS
iPhone 3G
iPad (3rd generation)
iPad 2
iPad
* The iPod nano (6th generation) cannot be
controlled by the remote when the command of
MENU,” “,” “,” and “ENTER” is pressed.
Design and specifications are subject to change
without notice.
Preparations
Power source
Auto power off
After playback of the iPod (or component
connected to AUDIO IN jack) has finished, if no
operation is performed for about 20 minutes, the
unit will automatically turn off.
To prepare a power source
This unit contains a rechargeable battery pack.
Charge the battery before using this unit for the
first time, or when it is depleted. You can operate
the unit while charging.
1 Connect the supplied AC adaptor to the
DC IN 6.5V jack on the back of this unit
firmly, and plug it into a wall outlet to
charge the battery.
Note on the AC adaptor
Use the supplied Sony AC adaptor only. The
polarity of the plugs of other manufacturers
may be different. Failure to use the supplied AC
adaptor may cause the unit to malfunction.
2 Confirm that charging has started.
The BATTERY/CHARGE indicator (red) lights
up while charging, and turns off when
charging is complete.
Note

It will take maximum 7 hours to charge the
battery.
To use the rechargeable
battery
You can operate the unit with the rechargeable
battery instead of the AC adaptor.
Notes on the rechargeable battery

The maximum output will be lower when the
AC adaptor is disconnected.

The BATTERY/CHARGE indicator (green)
becomes dim when the battery is weak, and
turns off when remaining battery power is
depleted.
Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
8) Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9) Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade
or the third prong are provided for your safety.
If the provided plug does not fit into your
outlet, consult an electrician for replacement
of the obsolete outlet.
10) Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit
from the apparatus.
11) Only use attachments/accessories specified by
the manufacturer.
12) Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms
or when unused for long periods of time.
14) Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way, such
as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate
normally, or has been dropped.
For the state of California USA only
Perchlorate Material –special handling may apply, see
www.dtsc.ca.gov/hazardouswaste/perchlorate
Perchlorate Material: Lithium battery contains
perchlorate
RECYCLING NICKEL METAL HYDRIDE
BATTERIES
Nickel Metal Hydride batteries are
recyclable. You can help preserve
our environment by returning
your used rechargeable batteries to
the collection and recycling
location nearest you.
For more information regarding recycling of
rechargeable batteries, call toll free 1-800-822-8837 or
visit http://www.rbrc.org/
Caution: Do not handle damaged or leaking Nickel
Metal Hydride batteries.
On copyrights
iPad, iPhone, iPod, iPod classic, iPod nano, and
iPod touch are trademarks of Apple Inc.,
registered in the U.S. and other countries.
“Made for iPod,” “Made for iPhone,” and “Made
for iPad” mean that an electronic accessory has
been designed to connect specifically to iPod,
iPhone or iPad, respectively, and has been
certified by the developer to meet Apple
performance standards. Apple is not responsible
for the operation of this device or its compliance
with safety and regulatory standards. Please note
that the use of this accessory with iPod, iPhone or
iPad may affect wireless performance.
Precautions

To disconnect AC power, grasp the plug itself,
not the cord.

Since a strong magnet is used for the speaker,
keep credit cards using magnetic coding or
spring-wound watches, CRT-based TVs, or
projectors, etc., away from the unit to prevent
possible damage from the magnet.

Do not leave the unit in a location near a heat
source such as a radiator or airduct, or in a
place subject to direct sunlight, excessive dust,
mechanical vibration, or shock.

Allow adequate air circulation to prevent
internal heat build-up. Do not place the unit on
a surface (a rug, a blanket, etc.) or near
materials (a curtain) which might block the
ventilation holes.
English
Owners Record
The model number and the serial number are located on
the bottom.
Record the serial number in the space provided below.
Refer to them whenever you call upon your Sony dealer
regarding this product.
Model No. RDP-T50iP
Serial No. ________________________________
For customers in the USA
Please register this product on line at
http://www.sony.com/productregistration
Proper registration will enable us to send you
periodic updates about new products, services, and
other important announcements. Registering your
product will also allow us to contact you in the
unlikely event that the product needs adjustment
or modification. Thank you.
WARNING
To reduce the risk of fire or electric
shock, do not expose this apparatus to
rain or moisture.
To reduce the risk of fire, do not cover the
ventilation of the apparatus with newspapers,
tablecloths, curtains, etc. And do not place lighted
candles on the apparatus.
To reduce the risk of fire or electric shock, do not
expose this apparatus to dripping or splashing,
and do not place objects filled with liquids, such
as vases, on the apparatus.
Do not install the appliance in a confined space,
such as a bookcase or built-in cabinet.
Do not expose the batteries (battery pack or
batteries installed) to excessive heat such as
sunshine, fire or the like for a long time.
As the main plug of AC adaptor is used to
disconnect the AC adaptor from the mains,
connect it to an easily accessible AC outlet.
Should you notice an abnormality in it,
disconnect it from the AC outlet immediately.
The unit is not disconnected from the AC power
source (mains) as long as it is connected to the
wall outlet, even if the unit itself has been turned
off.
The nameplate and important information
concerning safety are located on the bottom
exterior of the main unit and on the surface of the
AC adaptor.
You are cautioned that any changes or
modifications not expressly approved in this
manual could void your authority to operate this
equipment.
CAUTION
Danger of explosion if battery is incorrectly
replaced. Replace only with the same type.
NOTE
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses and
can radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning
the equipment off and on, the user is encouraged
to try to correct the interference by one or more
of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV
technician for help.
WARNING

Replace the battery for the remote commander
with a Sony CR2025 lithium battery only. Use
of another battery may present a risk of fire or
explosion.

Battery may explode if mistreated. Do not
recharge, disassemble or dispose of in fire.

Dispose of used battery promptly, according to
local environmental laws and guidelines in
force. Keep away from children.
When to replace the rechargeable
battery
Repeated recharging causes the capacity of the
battery power to decrease over time. Replace the
battery pack when its capacity becomes half the
usual time, even after charging it fully.
Note

The rechargeable battery pack is not a
commercially available product. To purchase
rechargeable battery pack (NH-RDPT50),
consult with your nearest Sony dealer.
To replace the rechargeable
battery
1 Remove the screw of the battery
compartment at the bottom of the unit,
and open the lid.
2 Disconnect the connector of the battery
pack and pull the old one out.
3 Insert a new battery pack and connect its
connector to the jack.
4 Replace the battery compartment lid and
tighten the screw.
Notes

Charge a new battery pack before use. See “To
prepare a power source” for details.

Turn off the unit and disconnect the AC
adaptor before replacing the battery pack.

When replacing the battery pack, place a soft
cloth etc., under the unit.
To reset the unit
Press the RESET button on the bottom of the unit
with a pointed object if the buttons on the unit do
not function.
How to use the Storage
Stand
To open the Storage Stand
There is a storage stand on the back of the
unit. To open the stand, see “Startup Guide.
To close the Storage Stand
Close the stand while holding the RELEASE
button.
To store the remote control
Put the remote into the stand.
Remote control
Before using the supplied remote for the first
time, remove the insulation film.
Aim the remote at the (Remote sensor) of the
unit.
The  button indicator flashes when the
remotes command is received.
When to replace the battery
With normal use, the battery (CR2025) should
last for about 6 months. When the remote can no
longer operate the unit, replace the battery with a
new one.
side facing up
Note

If you are not going to use the remote for a long
time, remove the battery to avoid any damage
that may be caused by leakage or corrosion.
4-437-622-11(1)
©2012 Sony Corporation Printed in China
Personal Audio
Docking System
RDP-T50iP
Operating Instructions US
Manual de instrucciones ES
Español
Registro del propietario
El número de modelo y el número de serie se encuentran
en la parte inferior.
Anote el número de serie en el espacio que se
proporciona a continuación. Consúltelos siempre
que llame a un distribuidor Sony en relación con este
producto.
N.º de modelo RDP-T50iP
N.º de serie ___________________________________
Para clientes en los EE. UU.
Registre este producto en línea en la página
http://www.sony.com/productregistration
Un registro adecuado nos permitirá enviarle de
manera periódica correos electrónicos acerca
de productos nuevos, servicios y otras noticias
importantes. Además, registrar el producto nos
permitirá ponernos en contacto con usted en
caso de que el producto necesite algún ajuste o
modicación. Gracias.
ADVERTENCIA
Para reducir el riesgo de incendio o
descarga eléctrica, no exponga este
aparato a la lluvia ni a la humedad.
Para reducir el riesgo de incendio, no cubra los
agujeros de ventilación del aparato con
periódicos, manteles, cortinas, etc., y no ponga
velas encendidas encima del aparato.
Para reducir el riesgo de incendio o descarga
eléctrica, no exponga nunca el aparato a
salpicaduras ni coloque sobre él objetos que
contengan líquido, como jarrones.
No instale el aparato en un espacio cerrado, como
una estantería para libros o un armario
empotrado.
No exponga las baterías (el paquete de baterías o
las baterías instaladas) a un calor excesivo como
el sol directo, fuego o similar durante un período
prolongado.
Puesto que el enchufe principal del adaptador de
ca se usa para desconectar este adaptador, es
recomendable usar una toma de corriente de ca
de fácil acceso. Si detecta algo anormal en el
enchufe, desconecte de inmediato la unidad de la
toma de corriente de ca.
La unidad no estará desconectada de la fuente de
alimentación de ca (toma de corriente) mientras
esté conectada a la toma de pared, aunque es
apagada.
En la parte inferior externa de la unidad principal
y en la superficie del adaptador de ca se
encuentran la placa de identificación e
información importante sobre seguridad.
Se le advierte que cualquier cambio o
modificación no autorizada expresamente en este
manual podrá anular la autorización que usted
tiene para utilizar este equipo.
PRECAUCIÓN
Existe el riesgo de explosión si se cambia
incorrectamente la batería. Cámbiela solo por
otra del mismo tipo.
NOTA
Este equipo ha sido probado y se ha encontrado
que cumple con los límites estipulados para un
dispositivo digital de Clase B, en conformidad
con el apartado 15 de las normas de la FCC. Estos
límites están designados para ofrecer protección
razonable contra las interferencias nocivas en una
instalación residencial. Este equipo genera, utiliza
y puede radiar energía de radiofrecuencia y, si no
se instala y utiliza de acuerdo con las
instrucciones, podrá ocasionar interferencias
nocivas para las comunicaciones de radio. Sin
embargo, no hay garantía de que no vayan a
ocurrir interferencias en una instalación en
particular. Si este equipo ocasiona interferencias
de radio nocivas para la recepción de radio o
televisión, lo que podrá determinarse apagando y
encendiendo el equipo, se sugiere que el usuario
intente corregir las interferencias tomando una o
más de las medidas siguientes:
Reoriente o reubique la antena de recepción.
Aumente la separación entre el equipo y receptor.
Conecte el equipo a una toma de corriente de un
circuito diferente al que está conectado el receptor.
Consulte al distribuidor o a un técnico con
experiencia en radio/TV para que le ayude.
ADVERTENCIA

Cambie la batería del control remoto por una
batería de litio Sony CR2025 únicamente. Si usa
cualquier otra batería, habrá riesgo de incendio
o explosión.

La batería puede explotar si se utiliza en forma
inadecuada. No la recargue, desarmar ni la
arroje al fuego.

Deseche la batería agotada de inmediato. De
acuerdo con las leyes y directrices ambientales
locales vigentes. Manténgala fuera del alcance
de los niños.
Instrucciones de seguridad importantes
1) Lea estas instrucciones.
2) Guarde estas instrucciones.
3) Preste atención a todas las advertencias.
4) Siga todas las instrucciones.
5) No utilice este aparato cerca del agua.
6) Límpielo solamente con un paño seco.
7) No bloquee ninguna abertura de ventilación.
Instale el aparato de acuerdo con las
instrucciones del fabricante.
8) No instale el aparato cerca de fuentes de calor
como radiadores, rejillas de salida de calor,
estufas, u otros aparatos (incluidos
amplificadores) que produzcan calor.
9) No anule la función de seguridad de la clavija
polarizada o de tipo con puesta a tierra. Una
clavija polarizada tiene dos cuchillas con una
más ancha que la otra. Una clavija de tipo con
puesta a tierra tiene dos cuchillas y una tercera
espiga de puesta a tierra. La cuchilla ancha o la
tercera espiga están provistas para su
seguridad. Si la clavija provista no encaja en su
toma de corriente, consulte con un electricista
para que le reemplace la toma de corriente
obsoleta.
10) Proteja el cable de alimentación para impedir
que pueda ser pisado o pinchado,
particularmente en los enchufes, tomas de
corriente con extensión eléctrica y puntos
donde salen del aparato.
11) Utilice solamente aditamentos/accesorios
especificados por el fabricante.
12) Utilícelo solamente con el carrito, estante,
trípode, soporte, o mesa especificado por el
fabricante, o vendido con el aparato. Cuando
se utilice un carrito, tenga cuidado al mover la
combinación de carrito/aparato para evitar
que se vuelque y le ocasione heridas.
13) Desenchufe este aparato durante las tormentas
eléctricas o cuando no lo vaya a utilizar
durante largos periodos de tiempo.
14) Solicite toda asistencia técnica a personal
cualificado. El servicio de reparación será
necesario cuando el aparato haya sido dañado
de cualquier forma, tal como cuando esté
dañado el cable de alimentación o la clavija, se
haya derramado líquido o hayan caído objetos
al interior del aparato, el aparato haya sido
expuesto a la lluvia o humedad, no funcione
normalmente, o se haya dejado caer.
Sólo para el estado de California, EE.
UU.
Material de perclorato: puede requerir una
manipulación especial; consulte
www.dtsc.ca.gov/hazardouswaste/perchlorate
Material de perclorato: la batería de litio contiene
perclorato
Para clientes de los EE UU y
CANADÁ
RECYCLADO DE BATERIAS DE
NÍQUEL-HIDRURO METALICO
Las baterías de níquel-hidruro
metalico son reciclables. Usted
podrá ayudar a conservar el
medio ambiente devolviendo
las baterías usadas al punto
de reciclaje mas cercano.
Para más información sobre el
reciclado de baterías, llame al número
gratuito 1-800-822-8837, o visite
http://www.rbrc.org/
Precaución: No utilice baterías de
níquel-hidruro metalico dañadas o con fugas.
Sobre los derechos de autor
iPad, iPhone, iPod, iPod classic, iPod nano y iPod
touch son marcas registradas de Apple Inc.,
registradas en Estados Unidos y otros países.
“Made for iPod”, “Made for iPhone” y “Made for
iPad” significa que un accesorio electrónico ha
sido diseñado específicamente para conectarse
con iPod, iPhone y iPad. Respectivamente, ha sido
certificado por el desarrollador para cumplir con
los estándares de rendimiento de Apple. En
ningún caso Apple se hace responsable de la
operación de este dispositivo o de su
cumplimiento con los estándares de regulación y
seguridad. Por favor, tenga en cuenta que el uso
de este accesorio con el iPod, iPhone o iPad puede
afectar al rendimiento del wireless.
Precauciones

Para desconectar la unidad de ca del suministro
de alimentación, tómela del enchufe, no del
cable.

Debido a que el altavoz utiliza un imán potente,
mantenga las tarjetas de crédito que utilizan
codificación magnética o los relojes de cuerda,
televisores de tubos de rayos catódicos (CRT) o
proyectores, etc. alejados de la unidad para
evitar posibles daños causados por el imán.

No coloque la unidad cerca de una fuente de
calor, como un radiador o conducto de aire, o
en un lugar que esté expuesto a la luz solar
directa, polvo excesivo, vibración mecánica o
golpes.

Deje que el aire circule adecuadamente para
evitar la acumulación interna de calor. No
coloque la unidad sobre una superficie (tapete,
manta, etc.) o cerca de materiales (cortinas) que
puedan obstruir los orificios de ventilación.

En caso de que un objeto sólido o líquido
cayera sobre la unidad, desenchúfela y haga que
la revise personal calificado antes de proseguir
con su uso.

Durante una tormenta eléctrica, no toque la
antena (aérea) ni el enchufe.

No toque la unidad con las manos mojadas.

No coloque la unidad cerca del agua.
NOTAS SOBRE LA BATERÍA DE LITIO

Limpie la batería con un paño seco para
garantizar un contacto adecuado.

Asegúrese de observar la polaridad al instalar la
batería.

No sostenga la batería con pinzas metálicas; de
lo contrario, podría producirse un
cortocircuito.
Nota

En el Manual de instrucciones, el término
“iPod” hace referencia en general a las
funciones de un iPod, iPhone o iPad a menos
que el texto o las ilustraciones especifiquen lo
contrario.
Si tiene alguna pregunta o problema en relación
con su unidad, póngase en contacto con su
distribuidor Sony más cercano.
Especificaciones
ESPECIFICACIONES DE LA
ALIMENTACIÓN DEL AUDIO
POTENCIA DE SALIDA Y DISTORSIÓN
ARMÓNICA TOTAL:
Con cargas de 3 ohms, ambos canales dirigidos,
desde 150 a 10 000 Hz; potencia eficaz RMS
mínima de 3 watts nominales por canal, con un
máximo del 10% de distorsión armónica total en
operación de ca.
iPod
Tensión nominal: cc 5 V
Corriente nominal: Máx. 2,1 A
Generales
Altavoz
Aprox. 50 mm (2 pulgadas) de diámetro. × 2
Entrada
Toma AUDIO IN (minitoma estéreo de ø 3,5 mm)
Impedancia de entrada: 10 kQ
Nivel de entrada estándar: 245 mV
Salida de potencia
3 W + 3 W (distorsión armónica al 10%)
(con adaptador de ca)
1 W + 1 W (distorsión armónica al 10%)
(con batería recargable)
Fuente de alimentación
Fuente de alimentación externa calificada: DC IN
6,5V (Con adaptador de ca suministrado [ca
100 V - 240 V, 50 Hz/60 Hz]) o paquete de batería
recargable: NH–RDPT50
Vida útil de la batería
Aproximadamente 5 horas (Reproducción de
iPod)
Dimensiones (que incluye partes salientes y
controles)
Aprox. 337,0 mm × 108,5 mm × 77,0 mm
(an/al/prf)
(13
3
/
8
pulgadas × 4
3
/
8
pulgadas × 3
1
/
8
pulgadas)
(bandeja de acoplamiento y soporte para
almacenamiento cerrados)
Aprox. 337,0 mm x 108,5 mm x 130,0 mm
(an/al/prf)
(13
3
/
8
pulgadas × 4
3
/
8
pulgadas × 5
1
/
8
pulgadas)
(bandeja de acoplamiento y soporte para
almacenamiento abiertos)
Masa
Aproximadamente 1,2 kg (2 libras 10 onzas)
Accesorios suministrados
Control remoto (con una batería de litio) (1)
Adaptador de ca (1)
Instrucciones de funcionamiento (este
documento) (1)
Almohadilla para iPod pequeño (1)
Modelos de iPod/iPhone/
iPad compatibles
A continuación, se indican los modelos de iPod/
iPhone/iPad compatibles.
Actualice el software del iPod/iPhone/iPad a la
última versión antes de utilizar esta unidad.
iPod touch (4
a
generación)
iPod touch (3
a
generación)
iPod touch (2
a
generación)
iPod nano (6
a
generación)
iPod nano (5
a
generación)
iPod nano (4
a
generación)
iPod nano (3
a
generación)
iPod classic
iPhone 4S
iPhone 4
iPhone 3GS
iPhone 3G
iPad (3
a
generación)
iPad 2
iPad
* El iPod nano (6ª generación) no puede
controlarse con el control remoto cuando se
presiona “MENU, “, “” y “ENTER.
El diseño y las especificaciones están sujetos a
cambios sin previo aviso.
Preparaciones
Fuente de energía
Sistema de desconexión automática
Después de que la reproducción del iPod (o de un
componente conectado al conector AUDIO IN )
haya finalizado, si no se realiza ninguna operación
durante aproximadamente 20 minutos, la unidad
se apagará automáticamente.
Para preparar una fuente de
energía
Esta unidad contiene una batería recargable.
Cargue la batería antes de usar por primera vez
esta unidad, o cuando esté agotada. Puede utilizar
la unidad mientras se carga.
1 Conecte firmemente el adaptador de ca
suministrado al conector DC IN 6,5V
ubicado en la parte trasera de esta
unidad, y enchúfelo a una toma de la red
para cargar la batería.
Nota acerca del adaptador de ca
Use únicamente el adaptador de ca Sony
suministrado. Es posible que la polaridad de los
enchufes de otros fabricantes sea diferente.
Pueden producirse fallas en la unidad si no se
utiliza el adaptador de ca suministrado.
2 Confirme que la carga ha comenzado.
El indicador de BATTERY/CHARGE (rojo) se
encenderá durante la carga, y se apaga
cuando la carga esté completa.
Nota

La carga de la batería tomará un máximo de
7 horas.
Para usar la batería
recargable
Puede operar la unidad con la batería recargable
en lugar del adaptador de ca.
Notas sobre la batería recargable

La salida máxima será más baja cuando el
adaptador de ca esté desconectado.

El indicador BATTERY/CHARGE (verde) se
tornará tenue cuando la batería esté baja, y se
apagará cuando el resto de la batería se agote.
En qué momento debe reemplazar la
batería recargable
La carga repetida hace que la capacidad de la
batería disminuya con el tiempo. Reemplace la
batería cuando su capacidad sea la mitad de la
normal, incluso después de cargarla por completo.
Nota

La batería recargable no es un producto
comercialmente disponible. Para comprar la
batería recargable (NH-RDPT50), comuníquese
con su distribuidor de Sony más cercano.
Para reemplazar la batería
recargable
1 Retire el tornillo del compartimiento de
la batería en la parte inferior de la unidad
y abra la tapa.
2 Desconecte el conector de la batería y
retire la batería vieja.
3 Inserte una nueva batería y conecte su
conector a la toma.
4 Coloque nuevamente la tapa del
compartimiento de la batería y ajuste el
tornillo.
Notas

Cargue la batería nueva antes de usarla. Para
conocer más detalles, consulte la sección “Para
preparar una fuente de energía.

Apague la unidad y desconecte el adaptador de
ca antes de reemplazar la batería.

Cuando reemplace la batería, coloque una tela
suave, etc., debajo de la unidad.
Para volver a configurar la
unidad
Presione el botón RESET en la parte inferior de la
unidad con un objeto puntiagudo si los botones
de la unidad no funcionan.
Cómo utilizar el
soporte para
almacenamiento
Para abrir el soporte para
almacenamiento
Hay un soporte de almacenamiento en la parte
posterior de la unidad. Para abrir el soporte,
consulte la “Guía de inicio rápido.
Para cerrar el soporte para
almacenamiento
Cierre el soporte mientras mantiene presionado el
botón RELEASE.
Para almacenar el control
remoto
Coloque el control remoto en el soporte.
Control remoto
Antes de utilizar por primera vez el control
remoto suministrado, quite la película aislante.
Apunte el control remoto a (sensor remoto) de
la unidad.
El botón indicador  parpadea cuando recibe
el comando del control remoto.
Cuándo se debe cambiar la batería
En condiciones normales de uso, la batería
(CR2025) debería durar unos 6 meses. Cuando la
unidad ya no funcione con el control remoto,
sustituya la batería por una nueva.
El lado hacia arriba
Nota

Si no va a utilizar el control remoto durante un
período de tiempo prolongado, retire la batería
para evitar que se produzcan daños por fugas o
corrosión.
RESET button
Botón RESET
Page view 0
1 2

Summary of Contents

Page 1 - Docking System

Should any solid object or liquid fall into the unit, unplug the unit and have it checked by qualified personnel before operating it any further.D

Page 2

About AppA dedicated dock app for iPod touch, iPhone, and iPad available at Apple App Store. Search for “D-Sappli” and download the free app to find

Comments to this Manuals

No comments