Sony DVS-9000-C User Manual

SWITCHER PROCESSOR PACKDVS-9000-CDVS9000SF-CINSTALLATION MANUAL1st EditionHK-PSU04BKDS-9160BKDS-9161BKDS-9162BKDS-9210MKS-8110SDMKS-8111SDDVS-9000DVS-

1-2DVS-9000/9000SF1-3. Installation Space (External dimensions)Unit : mm1-3. Installation Space (External dimensions)1-3-1. DVS-900035752037561370144.

1-3DVS-9000/9000SF1-3. Installation Space (External dimensions)37561380144.5 115.5 115.517.548237.2101.6176(4U)1614654403575201-3-2. DVS-9000SFUnit :

1-4DVS-9000/9000SF1-4. Installing the OptionsThe DVS-9000-C/DVS9000SF-C is shipped from thefactory with the necessary option boards (refer to thefollo

1-5DVS-9000/9000SFInstallation Procedure1. Turn off the main power of the DVS-9000/9000SF anddisconnect the AC power cord from the wall outlet.2. Loos

1-6DVS-9000/9000SF1-4-2. Installing the Connector Board1. Remove the two screws and remove the blank panel.m. To install the connector board into the

1-7DVS-9000/9000SF2. Insert the connector board horizontally level andsecure it with the two fixing screws.DVS-9000 optionName of option Name of board

1-8DVS-9000/9000SF1-5. Rack MountingThe DVS-9000/9000SF is mounted in the 19-inch standardrack. To mount the DVS-9000/9000SF in the rack, use thespeci

1-9DVS-9000/9000SF1-5. Rack Mounting2. Rack Mounting ProcedureThis section describes the rack mounting procedure usingthe RMM-10 rack mount kit.nTight

1-10DVS-9000/9000SF1-5. Rack Mounting6. Align the groove of the rack tool at the side of theequipment with the rail, and slide the equipment to therea

1-11DVS-9000/9000SF1-6. Matching Connectors1-6. Matching ConnectorsUse the following connectors, cables or equivalents when connecting cables to the u

DVS-9000/9000SF! WARNINGThis manual is intended for qualified service personnel only.To reduce the risk of electric shock, fire or injury, do not perf

1-12DVS-9000/9000SF1-7. Input/Output Signals of Connectors_ EXT VIEW _15691131425_ EXT VIEW _+VGPI OUT x BGPI OUT x AGPI OUT 5-8GPI OUT COMx : 1-4<

1-13DVS-9000/9000SF1-7. Input/Output Signals of Connectors_ EXT VIEW _156918_ EXT VIEW _REMOTE 1 to 4 : RS-422A (D-sub 9-pin, Female)<DEVICE> (*

1-14DVS-9000/9000SF1-8. Checks on Completion of Installation12345AB C D ED101D102D103D104TP101TP102TP103TP104ND101ND102ND501ND502ND701ND702D309D310D60

1-15DVS-9000/9000SF1-8. Checks on Completion of InstallationD802 (A-2) : COM2 100 status LEDCOM CPU-2 Ethernet communication speed statusindication.Li

1-16DVS-9000/9000SF1-8. Checks on Completion of InstallationCN503 (A-5) : TERMINAL pinThis pin is connected to the COM CPU-1 control terminaland used

1-17DVS-9000/9000SF1-8. Checks on Completion of InstallationDI3 (F-3), DI6 (F-3), DI7 (F-3), DI8 (F-4) (green) :STATUS1 to STATUS4 LEDUsed for mainten

1-18DVS-9000/9000SF1-8. Checks on Completion of InstallationA side/Component side2. MIX-46 board (DVS-9000/9000SF/BKDS-9210)TP302D308TP301D304TP101D10

1-19DVS-9000/9000SF1-8. Checks on Completion of Installation<Switch>S301 (A-8) : MIX-CPU reset switchPressing this switch initializes the CPU on

1-20DVS-9000/9000SF1-8. Checks on Completion of Installation<LED>D103, D107 (A-4) : +++++1.8 V-1 and 2+1.8 V-1 and 2 power supply status indicat

1-21DVS-9000/9000SFS400 (A-9) : MONITOR reset switchThe reset switch that is used to reset the monitor duringmaintenance through the terminal.<Slit

DVS-9000/9000SFAttention-when the product is installed in Rack:1. Prevention against overloading of branch circuitWhen this product is installed in a

1-22DVS-9000/9000SF1-8. Checks on Completion of Installation<LED>D103, D107 (A-4) : +++++1.8 V-1 and 2+1.8 V-1 and 2 power supply status indicat

1-23DVS-9000/9000SFS800 (A-10) : MONITOR reset switchThe reset switch that is used to reset the monitor duringmaintenance through the terminal.<Sli

1-24DVS-9000/9000SF5. XPT-21 board (DVS-9000/9000SF)E9E7AB C DE F GH J K L MN P R12345678910111213D3401S3401CN3001CN3301E3TP3001E4TP3005TP3002TP3004TP

1-25DVS-9000/9000SFCN3303 (A-6) : DEBUG terminalNot used.This terminal conforms to RS-232C.CN3901 (A-11) : IEEE1394 terminalNot used.This terminal con

1-26DVS-9000/9000SF*a : Connect each LAN (CTRL, DATA) to the separate Ethernet switches respectively.However, a single Ethernet switch can be used for

1-27DVS-9000/9000SF1-9. System Connection*a : For the AC power cord, refer to Section “1-2-2. Recommended Power Cord”.*b : Terminate the system with t

2-1DVS-9000/9000SFSection 2Service Overview2-1. TroubleshootingThe main power of the DVS-9000 cannot beturned on. (Indicator does not light green.)The

2-2DVS-9000/9000SF2. FanDVS-9000 series is air-cooled by the fans (on both sides).If dust has accumulated in the intake of the fan, air isprevented fr

2-3DVS-9000/9000SF2-3. About the Data Backup CapacitorA large capacitor is installed on the CA-44 board in orderto backup the memory storing the setup

DVS-9000/9000SFThe material contained in this manual consists ofinformation that is the property of Sony Corporation.Sony Corporation expressly prohib

Printed in JapanSony Corporation 2002. 7 16B&P Company ©2002DVS-9000-CDVS9000SF-C (SY) E3-620-567-01

1DVS-9000/9000SFTable of ContentsManual StructurePurpose of this manual ...

3DVS-9000/9000SFPurpose of this manualThis manual is the installation manual of Switcher Processor Pack DVS-9000-C/DVS9000SF-C and their optional boar

1-1DVS-9000/9000SFSection 1Installation1-1. Operating EnvironmentOperating guaranteed temperature : +5 dC to +40 dCPerformance guaranteed temperature