Sony XDR-S100CD User Manual download pdf

XDR-S100CD_4-127-390-13(1)_CEK XDR-S100CD_4-127-390-13(1)_CEK

DAB/FM/CD

Audio System

4-127-390-13(1)

XDR-S100CD

Operating Instructions



AC power adaptor

(supplied)



DC IN 9 V

R14 (size C)  6



Insert the  side of the

battery first.

Be sure to insert batteries

from this position one by one.

Carrying handle

WARNING

To reduce the risk of fire or electric shock, do not

expose this apparatus to rain or moisture.

To reduce the risk of fire, do not cover the ventilation of

the apparatus with newspapers, tablecloths, curtains, etc.

And do not place lighted candles on the apparatus.

To reduce the risk of fire or electric shock, do not expose

this apparatus to dripping or splashing, and do not place

objects filled with liquids, such as vases, on the

apparatus.

Do not install the appliance in a confined space, such as a

bookcase or built-in cabinet.

The unit shall be connected to a AC outlet with a

protective earthing connection.

As the main plug is used to disconnect the unit from the

mains, connect the unit to an easily accessible AC outlet.

Should you notice an abnormality in the unit, disconnect

the main plug from the AC outlet immediately.

You are cautioned that any changes or modifications not

expressly approved in this manual could void your

authority to operate this equipment.

Excessive sound pressure from earphones and

headphones can cause hearing loss.

Notice for customers: the following information is

only applicable to equipment sold in countries

applying EU directives

The manufacturer of this product is Sony Corporation,

1-7-1 Konan, Minato-ku, Tokyo, 108-0075 Japan. The

Authorized Representative for EMC and product safety is

Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327

Stuttgart, Germany. For any service or guarantee matters,

please refer to the addresses given in separate service or

guarantee documents.

WARNING



Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type.



Battery may explode if mistreated. Do not recharge,

disassemble or dispose of in fire.



Do not expose the batteries (battery pack or batteries

installed) to excessive heat such as sunshine, fire or the

like for a long time.



Dispose of used battery promptly. Keep away from

children.

Features



DAB(Band-III)/FM Radio



Built-in CD Player with Slot-in Style



High Quality Sound with Stereo Speaker



Pause & Rewind Function



Electronic Programme Guide



Easy to Read Large Display (16 × 4 lines character)



Easy Station Selection with Jog Dial



DAB 20/ FM 20 Station Presets



Guide/Alarm/Sleep Timer



Tone Control Function



Audio in for Digital Music Players



AC/DC Operation (AC Power Adaptor Supplied)



Remote Control

Choosing power sources

Using house current

(See fig. -)

Connect the AC power adaptor (supplied) to the DC IN

9 V jack firmly, and plug it into a wall outlet.

Notes on the AC power adaptor



When operating the unit with the internal batteries,

remove the AC power adaptor from the wall outlet and the

DC IN 9 V jack. Make sure that the plug of the external

power source is disconnected before operating the unit.



Use the supplied Sony AC power adaptor only. The

polarity of the plugs of other manufacturers may be

different. Failure to use the supplied AC power adaptor

may cause the unit to malfunction.

Installing batteries (See fig.



-

)

1 Open the battery compartment at the rear of

the unit.

2 Install six R14 (size C) batteries (not

supplied), observing polarity, and then close

the lid.

Battery Life (Approx. hours) (JEITA*)

When using DAB FM CD

Sony alkaline LR14 (size C) 10 7 4

Sony R14 (size C) 3 2 1

* Measured by JEITA (Japan Electronics and

Information Technology Industries Association)

standards. The actual battery life may vary depending

on the circumstance of the unit.

Note on replacing the batteries

When the batteries are replaced, the unit may revert to

the factory settings (except preset).

Notes on batteries



Do not attempt to recharge dry batteries.



Do not carry batteries with coins or other metallic

objects. It can generate heat if the positive and negative

terminals of the batteries are accidentally contacted by

a metallic object.



If you are not going to use the unit for a long time,

remove the batteries to avoid damage from battery

leakage and corrosion.



Do not use different types of batteries at the same time.



When you replace the batteries, replace all with new

ones.

Improving the reception

(See fig.



)

DAB Band-III/FM:

Extend the telescopic aerial and adjust the length and the

angle for best reception.

Notes



Adjust the direction of the aerial by

holding the bottom of it. The aerial

can be damaged if you move the

aerial with excessive force.



Be careful not to have the aerial touch the carrying

handle when listening to radio. It may cause noise.

Preparing the remote

control

Installing the batteries into the

remote control (See Fig.



)

Insert two R6 (size AA) batteries (not supplied).

When to replace the batteries

With normal use, the batteries should last for about six

months. When the remote control no longer operates the

unit, replace all the batteries with new ones.

Notes



Do not charge dry batteries.



If you are not going to use the remote control for a long

time, remove the batteries to avoid any damage caused

by leakage and corrosion.

Initial setting for the DAB

When the AC power adaptor is plugged in, or the

batteries are installed for the first time after purchase (or

after resetting), the unit will automatically scan and

create a list of receivable broadcasts.

1 Adjust the aerial accordingly.

2 Press POWER to turn on the radio.

“DAB TUNING”  “DAB NO SERVICE”  “DAB

INITIAL SCAN” appears in the display, the unit will

automatically scan, create a list of receivable DAB

broadcasts and adjusts the clock.

DAB scan takes a few minutes. When finished, the

unit receives the first service in order stored by the

DAB scan.

Notes



If you change the unit’s location of use, or want to

add a new service after the initial setting, press and

hold DAB/FM. “INITIAL SCAN?” appears in the

display and then press ENTER. The unit will

automatically scan and create a list of receivable

services.



If you set the initial setting or scan, any DAB

services registered as preset are erased.



If no services are found by the DAB scan, “NO

SERVICE” appears in the display. In that case, if

DAB is selected again, the unit will automatically

scan.



This unit supports only EPG in data service.

Set the clock

Do the following if DAB broadcasts are not available

(depending on area). The time setting mode by DAB

becomes invalid.

1 Press MENU and turn TUNING/SELECT to

select “CLOCK SETTING,” and then press

ENTER.

The hour indication will be displayed as follows.

2 Turn TUNING/SELECT to set the hour, and

then press ENTER.

3 Repeat step 2 to set the minutes.

After setting the time, the clock starts from 0

seconds.

Notes



The time will be adjusted automatically during DAB

service reception.



The clock system of this unit is 24-hour system (“0:00”

= midnight).

Time adjustment-

Summer time

Time adjustment is performed only during DAB service

reception.

DAB service reception for at least one minute is required

to reset the time to Summer time.

Operating the radio

The unit can receive DAB services and FM stations.

1 Press DAB/FM (RADIO/BAND on the

remote) to turn on the radio.

When the unit is turned on again, the last band you

listened to is received.

2 Press DAB/FM (RADIO/BAND on the

remote) repeatedly to select the desired band.

Each press changes the band as follows:

DAB FM

3 Turn TUNING/SELECT (press TUNE + or –

on the remote) to tune to the desired service

or station.

4 Adjust the volume using VOLUME.

Notes in FM usage



The frequency can be set in 0.05 MHz steps for FM.



If the FM broadcast is noisy, press and hold MODE on

the unit more than 2 seconds (press MODE on the

remote) until “MONO” appears in the display and the

radio will play in monaural.



When the unit receives an FM station transmitting

RDS data, text information appears in the display.



Each time you press DISPLAY, the display changes

current time and frequency.

To listen with headphones

You can enjoy the radio and external equipment

connected to the line in by headphones (not supplied).

Connect headphones (not supplied) to the 

(headphones) jack. The speaker is deactivated when

headphones are connected.



Aerial



R6 (size AA)  2

Presetting your favorite

services or stations

Presetting services and stations

You can preset 20 services and stations each for DAB and

FM.

1 Follow steps 1 to 3 in “Operating the radio”

and tune into service or station you wish to

preset.

2 Hold down MEMORY for more than 2

seconds.

“ENTER PRESET NO.” appears and preset number

flashes in the display.

The next preset number from the most recent preset

is displayed (but if the last preset number was 20, 1

will be displayed).

3 Turn TUNING/SELECT to select the preset

number, then press ENTER.

“PRESET COMPLETE!” appears in the display and

service or station is stored with the selected preset

number.

To preset another service or station, repeat these steps.

Notes



If you try to store another station with the same preset

number, the previously stored station will be replaced.



If DAB reception is poor, the service may not be stored.

Playing preset services or

stations

1 Press DAB/FM to select the band.

2 Press MODE on the unit until “PRESET”

appears in the display.

3 Turn TUNING/SELECT to tune in the stored

service or station.

Tip

On the remote, press PRESET + or – to tune in the

stored service or station.

Scan tuning (for FM)

The unit will automatically scan FM stations.

1 Press POWER to turn on the radio.

2 Press DAB/FM (RADIO/BAND on the

remote) to select the FM band.

3 Hold down SCAN + or – (TUNE + or – on the

remote) for more than 2 seconds.

+ : scans to the higher frequency.

– : scans to the lower frequency.

Scanning starts from the frequency being tuned in.

When a station is received, scanning stops.

4 If necessary, turn TUNING/SELECT (press

TUNE + or – on the remote) to tune in to the

station more precisely.

5 Adjust the volume using VOLUME.

1 2

DAB/FM/CD 1
Audio System 1

Summary of Contents

Page 1 - Audio System

Page 2

XDR-S100CD_4-127-390-13(1)_CEK XDR-S100CD_4-127-390-13(1)_CEKTroubleshootingShould any problem persist after you have made the following checks, consu

Comments to this Manuals

No comments

Sony XDR-S100CD User Manual

Browse online or download User Manual for CD radios Sony XDR-S100CD. Sony XDR-S100CD User manual

Summary of Contents

Comments to this Manuals

Related products and manuals for CD radios Sony XDR-S100CD